DOWNLOAD TECNO M7 STOCK ROM


Learn how to unbrick/flash this device using sp flash tool from here

Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloder, the device will be completely dead 
(can't power on, can't charge and will not be detected by a computer)


Dual-SIM
Dimensions: 146.7 x 76 x 10.4 mm
1 GB RAM, 4GB Internal Memory,supports up to 32GB microSD card

5-inch Capacitive Touch Display (480 x 854 pixels, 195 ppi)
8.0MP Camera with Flash
1.3MP Secondary Camera
Android 4.2 OS (Jelly Bean)
1.3 GHz Dual-core Processor
GSM/EDGE 900/1800MHz
WCDMA 2100MHz
3.75G Internet (Up to 21Mbps)
2000mAH Battery Capacity


TECNO M7 STOCK ROM
DOWNLOAD


Posted by
Labels: , ,

15 comments:

  1. Unknown8 August 2015 at 13:17

    Hello, I downloaded for M7 but am getting arror as BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069)

    ReplyDelete
  2. Unknown27 September 2015 at 20:34

    same problem for me !!

    ReplyDelete
  3. Unknown1 October 2015 at 19:11

    Thanks a lot bro my tecno m7 mobile it's return to life.Jesus Crist Blass you Brother.

    ReplyDelete
  4. medahanit24 February 2016 at 21:29

    same problem for me

    ReplyDelete
  5. Abbey Lee13 August 2016 at 14:57

    I downloaded the file,but after formatting,instead of read flash, it won't, it will just hang there what should I do,d phone is not even owning again ,bcos the phone was formatted before it reads flash,but instead to read flash ,it won .

    ReplyDelete
  6. Abbey Lee13 August 2016 at 14:58

    [email protected]

    ReplyDelete
  7. JinJanetA18 September 2016 at 17:28

    Thanks guys

    ReplyDelete
  8. Unknown1 May 2017 at 00:39

    Trial Mode

    ReplyDelete
  9. Chris onuoha23 November 2017 at 12:51

    Am Chris from IMO state ,I have same issue (brom error s DL pmt err no space (5069) ) have formated the phone and its to coming on again

    ReplyDelete
    Replies
    1. Amparas Teekaay27 November 2017 at 22:20

      U need to use the update firmware and flash your phone again

      Delete
  10. Unknown18 April 2018 at 12:32

    I can't download because of many adds

    ReplyDelete
  11. Unknown29 January 2019 at 07:19

    what can i do if that error occurred

    ReplyDelete
  12. Shamwilu yuseef21 January 2020 at 13:32

    No boot after flash please help

    ReplyDelete

Subscribe to: Post Comments (Atom)

Related Posts

Related Posts Plugin for WordPress, Blogger...