Note
Follow the instructions on how to
flash the device carefully below
I will not take responsibility on
whatever may happen to your device.
Flash at your own risk..
Make sure you are downloading the
exact ROM of the device you want to flash because
flashing a wrong preloader,
will make the device completely dead
(can't power on, can't charge and
will not be detected by a computer)
How to flash MTK devices using SP Flash Tool
Download,
MTK VCOM USB drivers from here
Download,
latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
For a more detail guide with video and pictures on how to use SP
Flash Tool, click here
You
can also use other tools like WiseLink, SP
Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash
this device
If you encounter any error while flashing your device, click here and see if it solves your problem
TECNO P5 QUICK SPECS
Rear Camera: 5 MP Camera with Flash, Autofocus, Smile detector
Front Camera: 2 MP Secondary Camera
Platform: Android 4.2.2 OS (Jelly Bean)
Processor: 1.0GHz Dual-core Processor
Dual SIM
GSM/EDGE 900/1800MHz
WCDMA 2100MHz
3.75G Internet (Up to 21 Mbps)
1800 mAH Battery Capacity
TECNO P5 OLD OS STOCK ROM
DOWNLOAD
Do not flash this ROM on Tecno P5 having NEW OS
If you are in need of Tecno P5 new OS stock ROM click here
Dimensions: 124.3 x 65.5 x 10.5 mm
Storage: 4GB ROM up to 32GB microSD card
Storage: 4GB ROM up to 32GB microSD card
Memory: 512MB RAM
Display: 4.0-inch TFT Capacitive Touch Display (480 x 800 pixels, 233 ppi)Rear Camera: 5 MP Camera with Flash, Autofocus, Smile detector
Front Camera: 2 MP Secondary Camera
Platform: Android 4.2.2 OS (Jelly Bean)
Processor: 1.0GHz Dual-core Processor
Dual SIM
GSM/EDGE 900/1800MHz
WCDMA 2100MHz
3.75G Internet (Up to 21 Mbps)
1800 mAH Battery Capacity
TECNO P5 OLD OS STOCK ROM
DOWNLOAD
Do not flash this ROM on Tecno P5 having NEW OS
If you are in need of Tecno P5 new OS stock ROM click here
This comment has been removed by the author.
ReplyDeleteHow will you know the difference between the new and the old P5 ROMS
ReplyDeleteThe old one boots with a blue TECNO logo wilhe New one boots with shiny white logo
Deletehope this helps
like u bro 100~`````` ur da real king my tecno complyt dead not charging how to fixx
ReplyDeleteDownload the right ROM of your device and flash it using SP Flash tool
DeleteI download rom but no calling
ReplyDeleteI still don't understand ur question
DeleteI still don't understand ur question
Deletethe phone gives invalid IMEI, Phone detects the two networks but network has X label on it
DeleteRestore ur imei with mtk engineering, mobile uncle, mtk droid tool or sn station
DeleteI have one Tecno p5 that only vibrate when you try to ON it...I've tried flashing it with p5 new and p5 old flash file but its not working...getting brom error 3183 with the two. Files...any solution pls?....thank you
ReplyDeleteI have one Tecno p5 that only vibrate when you try to ON it...I've tried flashing it with p5 new and p5 old flash file but its not working...getting brom error 3183 with the two. Files...any solution pls?....thank you
ReplyDeleteI have one Tecno p5 that only vibrate when you try to ON it...I've tried flashing it with p5 new and p5 old flash file but its not working...getting brom error 3183 with the two. Files...any solution pls?....thank you
ReplyDeleteUse a flashing box like volcano or miracle for that
DeleteWhen I am flashing my tecno p5 it keep telling me not enough memory please any help
ReplyDeleteIf you are sure the ROM is for your phone model, use format + download
Deletecan this be used on p5s
ReplyDeleteHiii King, pls, wuld I still nid to download d Sp flash after downloading d Rom 4 my P5
ReplyDeleteWhat exactly is the problem sir, all am getting is ENABLE DRAM FIAL ERROR which probably mean am flashing a wrong ROM so I decide to download both ROMs(new and old) but the problem still persist.
ReplyDeleteThis comment has been removed by the author.
ReplyDeletebrom error s_ft_enable_dram_fail (4032) solution
ReplyDeleteGood day to you all.. In fact I did all what you've written here .. I first of all did the old Tecno P5 got error code ft-enable-fail (4032)... and i went to download another new firmware tecno p5 but didnt work still got the same error code. please what can i do ? my tecno has been off since two months now. tecno p5 4.2.2 version. thank you.
ReplyDeleteMy p5 can't hardreset, it just bypasses after selection emmc option,what should I do?
ReplyDeleteWhen trying to flash my tecno p5 it says "wrong format range" how do i go about this.
ReplyDeleteBro I have one problem
ReplyDeleteMy tecno m6 dead after flashing it what should I do pls help
Interesting post. I Have Been wondering about this issue, so thanks for posting. Pretty cool post.It 's really very nice and Useful post.Thanks
ReplyDeletehow to use sp flash tool
it working thank you!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ReplyDelete