Pages

▼

HOW TO UNBRICK/FLASH MediaTek (MTK) DEVICES


Hello, I will be showing you how to flash or unbrick  dead MediaTek (MTK) devices like Tecno, Gionee, infinix, THL etc. using SP Flash Tools. Just follow the steps below carefully and your phone will come back to life.....

 Read the post from here before you follow the tutorial below Very important!!

 See video tutorial  from here
  • Download an install MTK drivers from here. OR
  • Download and install MT65XX VCOM drivers from here or here(Preferable)
  • Download SP flash tool (latest version is preferable) from here.
  • Download the stock rom of the device you want to unbrick or flash. Get stock roms from here.
  • Extract SP Flash Tool and launch.

  • Now click scatter-loading button so that flash process can begin.


  • locate the scatter file of the device. It will be inside the folder of the rom you downloaded.

  • Untick Preloader (not really necessary but a great precaution) tick this if the device is completely DEAD.
  • Please make sure you untick DSP_BL if found on the list shown in SP Flash Tools especially when trying to flash devices with older chips like mt6572, mt6577 etc
  • Now click download button.

  • Power off the device and remove battery (if battery is built in don't worry just continue ).
  • Most new devices now require battery for flashing.
  • Connect the device to the computer with USB and wait for SP Flash Tool to detect it.
  • Hold volume down or volume up button and connect the device for easy detection.
  • Once phone is detected a red line will be seen at the bottom followed by a yellow line.
  • When flashing is completed, a green tick is shown on the screen. Older versions of so flash tool will show a green circle.
  • Insert battery into the phone and reboot device...

If see any pop up error while trying to flash your device, Click here and see if this post can solve your problem.

All the Best...



  • If your device boot loops after flashing, do a factory reset.
  • Enter into recovery by holding volume down and power button. 
  • Scroll down the chinese menu and tap emmc  to do a factory reset
  • If you don't like chinese, enter into recovery by holding volume up and power button.
  • When you see the android man press volume up an power button again to see menu list.
  • Select factory reset..
  • Reboot device

207 comments:

  1. l918 August 2015 at 21:07

    merci pour le lien je vais teste

    ReplyDelete
  2. Johansson21 August 2015 at 15:42

    How long do I have to wait b4 flash tool detects phone??

    ReplyDelete
    Replies
    1. Amparas Teekaay25 August 2015 at 20:05

      Few Seconds. If it doesn't then know that your driver is not properly installed

      Delete
  3. Johansson25 August 2015 at 20:08

    Ok,,,thanks.

    ReplyDelete
  4. Johansson26 August 2015 at 00:29

    I knw wat am bout to ask nw isnt related to dis topic. Buh I really nid advice on dis...can I run BlackBerry q10 autoloader on BlackBerry q5?

    ReplyDelete
  5. Mvp26 August 2015 at 19:40

    Pls my tecno h6 stof the logos my recovery dn't work pls hlp me

    ReplyDelete
  6. Unknown9 September 2015 at 00:32

    Kindly flash the phone @ Mr Nestor

    ReplyDelete
  7. zedy kahama20 October 2015 at 10:14

    Y6 dead cant power on

    ReplyDelete
  8. Unknown20 October 2015 at 19:50

    Thank you very much for this wonderful tutorial, it saved my Tecno P5 which was becoming crazy after I tweaked it. Big uuuuuppp

    ReplyDelete
  9. Unknown22 October 2015 at 10:39

    Hello pliz help...instaled pop kat on techno h6 succesfully, but unfortunately yesterday when i powered it on it got stuck at boot image (boot loop).When i entered cwm recovery i got a note
    E: Can't mount /cache/recovery/command
    E: Can't mount /cache/recovery/log
    E: Can't open /cache/recovery/log
    E: Can't mount /cache/recovery/last_log
    E: Can't open /cache/recovery/last_log

    Rom recovery failed

    Help please

    ReplyDelete
    Replies
    1. Amparas Teekaay22 October 2015 at 17:18

      Do a factory reset. If it doesnt work, Download Tecno H6 stock rom and flash the phone using sp flash tool.
      Get tecno h6 rom from here http://www.romkingz.net/2015/06/download-tecno-h6-stock-rom.html

      Delete
  10. yallaya3rab22 October 2015 at 13:00

    plz can you help me in infinix hot 510 need the ver of sp can flash it thx

    ReplyDelete
  11. Unknown23 October 2015 at 10:51

    How about using cwm recovery flashing without pc??

    ReplyDelete
  12. Victor Adeniyi27 October 2015 at 13:28

    You are too much.....Just solved a malware problem of an hypertensive proportion. thank you

    ReplyDelete
  13. Faniyi Adedayo Olusanya12 November 2015 at 16:31

    Pls help h7cant charge and cant boot to recovery

    ReplyDelete
    Replies
    1. Amparas Teekaay14 November 2015 at 11:14

      Download the stock ROM and flash it using SP FLash tool or SP Multi Port Tool

      Delete
  14. Charles14 November 2015 at 09:59

    Av been looking for a cwm recovery image for tecno y4 if any of you guys have it or know where I can get it kindly email me
    My email addrs is [email protected]

    ReplyDelete
    Replies
    1. Amparas Teekaay14 November 2015 at 11:59

      Easily create an install a custom recovery for your device using this tutorial here

      Delete
  15. Unknown14 November 2015 at 17:08

    nice thread guys. i realy appreciate u. my phone tecno y3 got corrupted while changing the lock screen wallpaper and i come across this thread while search for solution. i carefully followed ur instrution and i was able to bring back my phone to life again. thanks Romkingz u save my money

    ReplyDelete
  16. JavaGroup126 November 2015 at 04:03

    Hi.... After successfully flashing tecno y4, and I turn on, it loads the logo and does not go any further.... pls help

    ReplyDelete
  17. Unknown3 December 2015 at 17:50


    the phone does not turn on After the flash with smart flashtool
    tecno H6

    help me...........$

    ReplyDelete
  18. Unknown8 December 2015 at 19:26

    pls i downloaded the infinix x506 stock rom with sp flash and every necessary drivers, but after flash it, my infinix x506 couldn't boot again (not powering on again) pls i need urgent solution. thanks in anticipation

    ReplyDelete
  19. Unknown8 December 2015 at 19:46

    ERROR CODE: S_FT_ENABLE_DRAM_FAIL (4031) AFTER FLASHING MY INFINIX X506 WITH STOCK ROM INFINIX X506 J608 20151019 I DOWNLOADED AND SP FLASH TOOL AND ITS NECESSARY DRIVERS BUT AFTER ALL THE INFINIX X506 COULDN'T ON AGAIN

    ReplyDelete
    Replies
    1. Amparas Teekaay10 December 2015 at 18:04

      Bro u will need to reflash ur phone with X506-J609 ROM. I will upload that soon

      Delete
  20. Unknown9 December 2015 at 12:16

    aisee hata sijaamini, nimefuatilia kwa utulivu maelekezo yako na kwa mara ya kwanza nimefanikiwa kuflash tecno Y3 na imewaka bila tatizo, shukrani mbno..

    ReplyDelete
  21. Unknown12 December 2015 at 17:24

    Bro... I tried following your instruction on flashing my bricked cube talk 9x. It was initially entering into recovery mode. but now it now boots loop

    ReplyDelete
    Replies
    1. Amparas Teekaay14 December 2015 at 00:15

      Do a factory reset. If it still boot loops,
      Look for another Stock firmware of your cube talk 9X and flash again

      Delete
    2. diagne25 November 2017 at 09:19

      hi bro why sometimes when you flash most of mtk devices nothing change even the password or pattenr lock still there and the flash was succesfull

      Delete
  22. Unknown15 December 2015 at 21:39

    Hi Tking, you said that you will upload that infinix X506-J609 pls can you help me upload it soon, because my phone have been dead for weeks now, thanks in anticipation

    ReplyDelete
  23. Unknown15 December 2015 at 21:41

    Hi Tking, you said that you will upload that infinix X506-J609 pls can you help me upload it soon, because my phone have been dead for weeks now, thanks in anticipation

    ReplyDelete
  24. Unknown19 December 2015 at 20:50

    Please where can I get tecno f7 stock rom

    ReplyDelete
  25. Unknown20 December 2015 at 18:25

    NIPDA TYPHOON MT6572 Version 4.4.2 rom need

    ReplyDelete
  26. OMOBA COMMUNICATION.NG21 December 2015 at 20:54

    my h5 dead after flashing wit wrong file not connection as preloader any more just shoeing mtk usb com pls help and nt flashing wit sp flash tools preloader dead


    ReplyDelete
  27. Unknown22 December 2015 at 17:49

    NIPDA TYPHOON MT6572 Version 4.4.2 scatter file need help me

    ReplyDelete
  28. Unknown25 December 2015 at 04:14

    I need Alcatel one touch 7047d flash file. The I miss behaving even if restore it. Tnx

    ReplyDelete
  29. Unknown25 December 2015 at 05:09

    Pls may use this file for techno n9 1 sim? Tnx

    ReplyDelete
    Replies
    1. Amparas Teekaay26 December 2015 at 22:07

      Check under tecno section u will see N9 ROM then use this to flash the device

      Delete
  30. Unknown27 December 2015 at 05:26

    Thanks for your hard work bro.. I mistakenly flash inifinix x551 1gb ram 16 gb rom lollipop infinix x551 2gb ram 16gb rom.. since the the phone dead totally .. I was trying to flash it back with it own stock rom but didn't work .. computer detected it and sp tool bcoz it shows brom error 2005 stuff like that .. what could be the solution please ...

    ReplyDelete
    Replies
    1. Amparas Teekaay27 December 2015 at 06:22

      - Try using firmware upgrade instead of just download.
      - A Flashing box will easily solve this

      Delete
    2. Unknown27 December 2015 at 17:37

      . My inifinix x551 has bricked.. it not flashing and if I remove the cable from the phone this is what I got brom error:s_brom_cmd_startcmd_failed (2005)
      [Brom] can not pass bootroom start command! Possibly target power up early ..

      Delete
  31. Unknown27 December 2015 at 17:29

    What is a flashing box bro.. please give me your number to communicate with you .. tanks while using firmware upgrade .. I should upload the scatter file right bro .. but I have all manner shay. . It says broom error .. 2005 blah blah

    ReplyDelete
  32. Unknown3 January 2016 at 07:37

    after flashing my techno m3 it came on with a white screen. i cant do anything with the phone its all white please help me

    ReplyDelete
    Replies
    1. Amparas Teekaay5 January 2016 at 15:40

      If it showed white screen, that means the ROM does not match the phone, use another ROM

      Delete
  33. ferdinand3 January 2016 at 16:09

    My tecno f5 stuck on tecno logo after flashng it kindl help me

    ReplyDelete
  34. Unknown7 January 2016 at 08:59

    when trying to flash my tecno p5 old os, the flashtool keeps saying "PMT file changed, please download"
    how do i solve this.

    ReplyDelete
    Replies
    1. Unknown7 January 2016 at 10:41

      never mind. i have used AIO flasher to flash it and it worked well. thanks for the stock ROM.

      Delete
    2. althair3 December 2017 at 23:46

      Format first

      Delete
  35. Unknown14 January 2016 at 09:34

    Bro, Thanks for your hard working .. after flashing my x507.. it work well but I have issue with the network of the phone .. if I switched it to 3g .. the network will just disappeared but if it on 2g no network failure .. help me pls..

    ReplyDelete
    Replies
    1. Amparas Teekaay16 January 2016 at 00:10

      How is the 3G network strength in your area???

      Delete
  36. Unknown14 January 2016 at 10:18

    Plz can I also flash the custom ROM without PC

    ReplyDelete
    Replies
    1. Amparas Teekaay16 January 2016 at 00:27

      To flash a custom ROM you must have a custom recovery on your phone like CWM, TWRP or Philz.
      Copy the custom ROM to your SDcard
      Boot into the custom recovery
      select install from zip
      select the custom ROM and wait for it to install

      Delete
  37. Unknown14 January 2016 at 10:20

    And again I downloaded it but it is showing me file error

    ReplyDelete
  38. Unknown14 January 2016 at 10:23

    And again I downloaded it but it is showing me file error

    ReplyDelete
  39. Unknown14 January 2016 at 10:23

    Plz can I also flash the custom ROM without PC

    ReplyDelete
  40. Unknown15 January 2016 at 00:36

    if am flashing my tecno m3 with battery in by using sp flash tool,whats happening?

    ReplyDelete
    Replies
    1. Amparas Teekaay16 January 2016 at 00:13

      You can flash your phone with battery infact most new devices now require battery present before they can be flashed

      Delete
  41. Unknown17 January 2016 at 01:33

    Please I don't know if you are familiar with the new Snokor Rocket Z5000 phone, I'm a female who just purchased it a month ago. The phone recently got stuck in the booting mode and I've taken it for repairs to several places. The engineers tell me they successfully downloaded the software needed for flashing but the PC cannot detect my phone at all and that I probably would never be able to use the phone again..... please help me.

    ReplyDelete
  42. Unknown17 January 2016 at 15:28

    Still I upgraded my x507 to lollipop the 3g network is not working again .. I even downgraded it still the same .. help me out

    ReplyDelete
  43. Unknown18 January 2016 at 14:49

    I got a message saying ( PMT changed for the ROM;it must be downloaded .)

    ReplyDelete
    Replies
    1. Amparas Teekaay19 January 2016 at 08:52

      If you see that Message, select format + download or firmware upgrade before you click Download button

      Delete
  44. Unknown18 January 2016 at 18:07

    This comment has been removed by the author.

    ReplyDelete
  45. Unknown19 January 2016 at 07:28

    the mtk driver link u inserted is nt opening, hw do i get the driver to download my guru?

    ReplyDelete
  46. kim10 February 2016 at 04:59

    hi, my infinix zero 8gb fell on the floor and went dead brick, wont charge or come on. how can i flash it without loosing any data. or how can i transfer the internal storage data to my pc b4 flashing(cos my pc is not detecting the phone when i connect because its dead.) plsssss i need help asap. thanks

    ReplyDelete
  47. Formatking10 February 2016 at 11:10

    hello kindly work on to engineer to check if the battery as been disconnected from the connector since it was felt on the ground @Kim

    ReplyDelete
  48. Formatking10 February 2016 at 11:10

    hello kindly work on to engineer to check if the battery as been disconnected from the connector since it was felt on the ground @Kim

    ReplyDelete
  49. Unknown24 February 2016 at 12:54

    am trying to flash infinix x507 using sp flash tool but i get a "PMT needs to be installed....what can the problem be

    ReplyDelete
  50. Improve The Home26 February 2016 at 17:14

    Please I need help when I flashed my Tecno H6 I got this error "PMT changed must be downloaded" and then I try Format All+Download.
    Now my phone is hard bricked and I get this error "BROM ERROR:S_TIMEOUT (1042)"

    ReplyDelete
  51. iykeafrica27 February 2016 at 11:59

    Can TECNO Y6 STOCK ROM
    Build Y6-G320-A1-KK-20150915 work for Build Y6-G320-A1-KK-20150526?

    Thanks in advance.

    ReplyDelete
    Replies
    1. Amparas Teekaay28 February 2016 at 16:10

      Yea. One is just the update of the other. Look at the dates 2015 05 26 & 2015 09 15. Hope u understand

      Delete
  52. Unknown28 February 2016 at 18:19

    please help me after flashing my infinix note 2 it is totally dead wont charge and cant do anything please what should i do
    thanks

    ReplyDelete
  53. Unknown15 March 2016 at 14:16

    After flashing tecno j7 boom showing the dark and I can't go to factory reset

    ReplyDelete
  54. Anonymous18 March 2016 at 10:14

    i have looked for this for years i own a tecno b3 i am following all the steps to the letter but am sill not getting any where . when i first got my tecno b3 i made the mistake or rooting it with the wrong software and that is where my trouble started . can some one pleas help me asap you're help will be a big help to me

    ReplyDelete
  55. Unknown20 March 2016 at 17:57

    Brom error s dl err no space when download the bootloader, somebody knows how to fix this problem? The phone is a plum mtk 6572 and it's dead, i can format the phone and i can download the preloader alone but when i try to download the others files (together or without the preloader) the program show me the error window. I have the only one Stock Rom i could find in internet (https://www.youtube.com/watch?v=TtOv6aMXpNE - the guy make a video-tutorial and gave the link with a copy of the program he used and the stock rom inside too)and sp flash tool. Note: The phone don't power on.

    ReplyDelete
  56. Unknown21 March 2016 at 02:25

    Hello.
    Thank you for your nice topic.
    I have htc 816g with mtk 6592 , I make flash to it , and it work well , but when I install recovery with mtkdroid tool , the device stop and it make reboot continuously,
    I want to flash it again , but sp flash tool stuck in red bar (download da 100%) , and my pc make sound that the device plug out and in .
    I tried many versions of sp flash tool without any success , I disconnect the battery socket and reflash it and that does not success , press volume down and plug in the device but no benefit .
    Is there any solution for that ?
    Thank you for advance .

    ReplyDelete
    Replies
    1. Amparas Teekaay21 March 2016 at 13:18

      - Whats the error message that pops up on sp flash tool?
      - Again you can try flashing it using WiseLinkTool

      Delete
  57. Unknown21 March 2016 at 16:19

    Please i flashed this Rom for Opsson S7. It boots to the Opsson logo but hangs there and does not come on. Also,i can not enter into Recovery Mode at all even when the phone was ok. I have tried all the button combinations yet no head way. Please help me. Thanks

    ReplyDelete
  58. Unknown24 March 2016 at 18:21

    Hey
    Please send me all the information I need to flash a Tecno Y5s to [email protected]

    ReplyDelete
  59. Unknown24 March 2016 at 18:24

    And a Nokia Lumia 720
    Regards

    ReplyDelete
  60. Eminent21 April 2016 at 12:57

    Pls, I want to change back to stock recovery on my tecno phantom z mini, how can I do dat? Thanks

    ReplyDelete
    Replies
    1. Amparas Teekaay21 April 2016 at 13:26

      If you have the Stock Rom, flash only recovery in SP Flash tool

      Delete
    2. Eminent21 April 2016 at 15:20

      Or is there any custom recovery properly working for that same device? All d custom recovery I downloaded was showing blank and d one I created was upside down? Thanks bro for d reply.

      Delete
  61. Unknown22 April 2016 at 00:18

    I rooted my techno m5 phone and I change to cwm recovery I purposely change to flash in an upgraded 5.1 os not knowing not really compatible and is Even 4.4 of another phone.

    I want to change it back to the normal status of android 4.2.2 how can I do it ?pls help me out!!!!!

    ReplyDelete
  62. Unknown28 April 2016 at 12:04

    heloo.. i tried to flash my tecno m7 phone with SP flash tool but it says PMT changed for the ROM, it should be downloaded... what should i do now

    ReplyDelete
    Replies
    1. Amparas Teekaay28 April 2016 at 17:54

      When you see "PMT changed for the ROM", use Firmware upgrade or Format + Download. But make sure the firmware you are about to flash is for that device oo

      Delete
  63. Unknown29 April 2016 at 02:27

    X506 after upgrading + download it doesnt come on again neither does the tuch respond please help

    ReplyDelete
  64. Unknown2 May 2016 at 12:15

    pls i ve a Tecno z mini which displays invalid imei and also hangs after few minuets of turning on. At times it hangs with a blur screen and when it does that nothing responds until the battery drains off.
    Pls what should I do? THANKS

    ReplyDelete
    Replies
    1. Amparas Teekaay4 May 2016 at 10:02

      For the imei issue you can easily solve It using mtk engineering app.
      For your hanging problem, you can flash the device using its stock rom and see if it solves the problem.

      Note that not all hanging problem is as a result of the phone software. Sometimes after using most mtk devices for long period of time lets say a year, small amount of heat can cause the chip inside the device to pull up a bit making the phone to freeze till the next reboot. In this case the chips are needed to be padded with pieces of paper or something else.

      Delete
  65. Oladimeji Gbenga9 May 2016 at 01:02

    please cant find xtouch x4plus stock rom anywhere online please help


    ReplyDelete
  66. Ojomooluda10 May 2016 at 12:54

    I am flashing my phantom z following your tutorial but the phone has remained connevted since I pressed download for 20 minutes with nothing happening. Can I stop the download and restart without damaging anything?

    ReplyDelete
    Replies
    1. Amparas Teekaay10 May 2016 at 16:31

      If you see a red bar on SP flash tool when you connect the device, that means your device is detected. But if not, know that MTK USB drivers are not properly installed.

      Delete
  67. A. Deyonz wae15 May 2016 at 04:49

    Master,,help me please,,i hv an advan vandroid s5e chip mt6572 totally dead,,cannot charge,cannot power on,and vibra no anything,,i try to flash wth sp flash tool,,but nonsens,,failed failed n failed,,can u help me to fix this master,,,?pleeeeeeeeaaassseeee,,,,

    ReplyDelete
  68. Unknown15 May 2016 at 08:47

    Download the latest SP Flash Tool.

    ReplyDelete
  69. Unknown18 May 2016 at 14:49

    Thanks alot, it worked

    ReplyDelete
  70. Unknown19 May 2016 at 15:45

    Complement boss, pls I hv a techno r7. It's rooted, flashed with a custom rom using cwm, though I backed up r7 stock rom before flashing it with the custom rom but somehow I lost the backed up file. Now I want to switch back to the r7 stock rom, what do I do.

    ReplyDelete
  71. Unknown24 May 2016 at 22:01

    Boss pls I mistakenly flash wrong rom to my x551 16+2 and the phone refuse to come on again but my system still recognise it pls what can I do to make it come up again

    ReplyDelete
    Replies
    1. Unknown25 May 2016 at 08:12

      Reflash the correct stock room using the most recent sp flashtool. Make sure you select the format and download option.

      Delete
  72. Unknown26 May 2016 at 18:26

    after done.. how to i get google acc?

    ReplyDelete
  73. Brainy Box28 May 2016 at 09:51

    This comment has been removed by the author.

    ReplyDelete
  74. Brainy Box28 May 2016 at 10:18

    hi friends, I a serious problem with my phone tecno d7 , after flash the rom stock issue for all resumes to zero , I tick all the same boxes the preloader and the MBR and flash it well peeled but when I Demare my phone the screen remains black while I may not fair , I see nothing , I can not access in recovery mode or fair anything but when I connect my phone to my computer detects the mobogenie and I can install the application and send it to music film profile pictures ... when we call it sounds please help me here is my email address [email protected] help me please SOS

    ReplyDelete
  75. Brainy Box28 May 2016 at 10:19

    my phone is TECNO J7 no TECNO d7

    ReplyDelete
  76. Unknown3 June 2016 at 20:30

    After Flashing My Tecno G.....It Has Stop Charging Pls What will I Do

    ReplyDelete
  77. Unknown4 July 2016 at 23:28

    tried to flash tecno h3 and it said PMT for ROM hanged. it must be downloaded.wht does it mean please?

    ReplyDelete
  78. leracki9 July 2016 at 12:54

    SUP bro please share with e the custom rom to tecno y6 kinda brickd my phone

    ReplyDelete
  79. Unknown10 July 2016 at 12:58

    How can I flash my be elite el020 without pc.

    ReplyDelete
  80. rayjack11 July 2016 at 01:40

    Good evening pls sire seriously need ur help hav tecno m3 old,mistakenly flashed all d files and now phone only vibrates when I press power button, pls what should I do now

    ReplyDelete
    Replies
    1. Amparas Teekaay12 July 2016 at 04:53

      Simply download the correct ROM and flash again

      Delete
    2. rayjack18 July 2016 at 23:47

      Please make sure you untick DSP_BL if found on the list shown in SP Flash Tools especially when trying to flash devices with older chips like mt6572, mt6577 etc

      I omited the step above ,and what I did was wipe all partion xcept bootloader then I flashed the whole loaded file on all partition. After flashing successfulv phone not booting up only vibrates wen power button is pressed. Doesn't come on

      Delete
  81. Unknown15 July 2016 at 10:06

    it work! Thank you so much!

    ReplyDelete
  82. Unknown17 July 2016 at 18:11

    i have a bricked Samsung k3 chi
    nese clone phone. i dont have dits stock ROM. what can i do.

    ReplyDelete
  83. Iykreated1 August 2016 at 02:21

    I flashed my wiko sunset2 with its stockrom and since then it doesn't charge nor turn on and doesn't get recognised on PC.... Help me

    ReplyDelete
  84. Unknown5 August 2016 at 09:47

    download new firmware or contact me 002330556148853

    ReplyDelete
  85. Unknown9 August 2016 at 22:47

    pls i want to install Driver_Auto_Installer_v1.1236.00 and it says,, Driver installer v1.0 Do not support Win NT earlier version, am using win 10

    ReplyDelete
    Replies
    1. Amparas Teekaay10 August 2016 at 12:05

      You will have to install the drivers manually from device manager.

      Delete
  86. emexix13 August 2016 at 03:58

    so after sucessfully flashing the stock rom for hot note, the touchpad stopped working. reflashed it numerous times and even reverted back to kitkat, same issue. pls help me guys

    ReplyDelete
  87. Unknown27 August 2016 at 15:18

    MISTAKE,I FLASH WITH PRE RODER AND NOW MY TECNO M3 VIBRATE ONLY WHEN I POWER ON?

    ReplyDelete
    Replies
    1. Amparas Teekaay29 August 2016 at 03:04

      Just download another M3 file and flash your phone again

      Delete
  88. Unknown30 August 2016 at 01:50

    Bro i dont know how but if possible please make it, i need your help please

    ReplyDelete
  89. Unknown30 August 2016 at 01:57

    I flashed INFINIX X600 note me please x532 with x533 rom it killed the phon, ok thank GOD dead cant be detected by pc, had to unscrew it runned a wire connection from the boot resistor or capasitor(just boot ic) to ground of the pannel, but now it rights brom error though i have downloaded its x532 rom lollipop and the other version same result, any idea to wake this phone this phone? customer on my neck, you can PM to give you more review of the phone condition

    ReplyDelete
    Replies
    1. Amparas Teekaay30 August 2016 at 07:08

      Don't join the jumper permanently. A single touch is ok
      Follow the tutorial here

      Delete
    2. Unknown3 September 2016 at 20:19

      Thanks buddy, it worked

      Delete
  90. Don Collins2 September 2016 at 11:03

    GET ANY TECHNO ROOM HERE

    ReplyDelete
  91. Unknown11 September 2016 at 15:03

    what is the passwword for xbo v 5 plsss :(

    ReplyDelete
  92. Unknown13 September 2016 at 21:17

    what is the password for rar

    ReplyDelete
  93. Unknown14 September 2016 at 09:25

    i downloaded firmware for tecno y2 here after flashing the phone with it it's bringing black and white lines. help.

    ReplyDelete
    Replies
    1. Unknown18 September 2016 at 21:43

      same here..guru Amparas Tking help us please..

      Delete
    2. Unknown13 December 2016 at 10:17

      get the original rom, one that hasnt been tampered with

      Delete
  94. Unknown27 September 2016 at 22:04

    i tried it but my device never came on again.....what do i do??

    ReplyDelete
    Replies
    1. Amparas Teekaay28 September 2016 at 17:32

      Download another ROM for your device (Latest) then flash your device again

      Delete
  95. Anonymous30 October 2016 at 23:51

    tecno n9 stuck on tecno logo, install everytin need for flashing, tried flashing it but my pc cant detect the phone.

    ReplyDelete
    Replies
    1. RomShillzz31 October 2016 at 01:35

      Check if your USB Cable is Perfectly working... Note if your USB Is Charging that those not mean the phone is connecting !

      Delete
  96. Anonymous31 October 2016 at 10:11

    Tablet does not turn on.

    Firmware upgrade gives me this - proinfo: Failed to get PMT info.

    Download gives - BROM ERROR : S_INVALID_BBCHIP_TYPE (1003)

    I have the original ROM.

    How to resolve please!

    ReplyDelete
  97. Unknown12 November 2016 at 11:58

    thanks so much for the help!!! you really saved my phone!

    ReplyDelete
  98. Kabiru Ibrahim Muhammad13 November 2016 at 17:23

    PLS IS THERE ANY HTC X-BO M8 MT6580 FLASH FILE?

    ReplyDelete
  99. Unknown15 November 2016 at 04:14

    I need a direct link to download techno y3 rom 5.0

    ReplyDelete
  100. Jamessy10 December 2016 at 12:49

    hello can somebody help? I hard bricked my infinix note2 now the port is not detecting in my system again

    ReplyDelete
  101. Unknown14 December 2016 at 10:32

    Thank you TKing. Worked for me.

    ReplyDelete
  102. Unknown21 December 2016 at 19:08

    My tecno y6 has not detected while removing battery

    ReplyDelete
  103. Unknown22 December 2016 at 03:59

    My micromax AQ4501 is dead later is flashed by using sp flash tool it shows broom error (s dl write pit fail (5072)) how to solve it please help me

    ReplyDelete
    Replies
    1. Amparas Teekaay22 December 2016 at 05:38

      Download the updated ROM of your device and flash again

      Delete
  104. Unknown23 December 2016 at 07:10

    I downloaded the stock ROM and used sp flash tool to download ROM the process was completed but the phone went dead what do I do? And I did not do a backup on the phone

    ReplyDelete
  105. Unknown23 December 2016 at 07:11

    I downloaded the stock ROM and used sp flash tool to download ROM the process was completed but the phone went dead what do I do? And I did not do a backup on the phone

    ReplyDelete
    Replies
    1. Amparas Teekaay23 December 2016 at 09:40

      The stock ROM u flashed is probably an old version. Download the latest version and flash again

      Delete
  106. COLLINS24 December 2016 at 23:08

    my tecno r7 was dead after format, cant detect to drivers manager. pls any solution to dat?

    ReplyDelete
  107. don11 January 2017 at 13:04

    prease halp me am flash my phone TECNO J7 dead cant power on prease

    ReplyDelete
  108. Unknown11 January 2017 at 16:08

    My tecno p5s is single lined,and according to the comments people are saying this rom is corrupt,please help

    ReplyDelete
  109. Unknown7 February 2017 at 00:23

    My Tecno R7 not booting stock at Tecno after flashing with stock file I downloaded here

    ReplyDelete
  110. Anonymous8 February 2017 at 04:41

    Hello , I have ZTE Blade q ,and it is dead, but when i want to flash it with SPF ,i get error ENABLE DRAM ERROR .... Please help me i think i doesnt install correctly Vcom drivers and problem is in Preloader . Thanks :)

    ReplyDelete
  111. Jospar Prezzo13 February 2017 at 09:09

    Unable to flash tecno M3s completely,it only goes to the red section an hangs there on sp flashtool. please help

    ReplyDelete
  112. Anonymous9 March 2017 at 13:01

    i nead to flash file tecno J7

    ReplyDelete
  113. Deryker13 March 2017 at 10:07

    My galaxy J7 2016 is showing no Os installed!what do i have to do?plz need your help

    ReplyDelete
  114. Unknown17 March 2017 at 06:27

    Good morning, bros pls I need ur o, after flashing kimfly e7 it boot white , help bros

    ReplyDelete
  115. Chinyere oluta4 April 2017 at 20:54

    Thanks alot... love it
    Tecno

    ReplyDelete
  116. Isiken Blog13 April 2017 at 14:39

    Thanks so much, work perfectly on Tecno G9 Tablet. God bless you.

    ReplyDelete
  117. Unknown8 May 2017 at 02:22

    halo i just rooted my tecno y6 and wiped everything including the back up imge were can i find one

    ReplyDelete
  118. Unknown22 May 2017 at 12:49

    my tecno c5 will not stop restarting i need help plezz

    ReplyDelete
  119. Unknown22 May 2017 at 12:50

    my tecno c5 will not stop restarting i need help plezz

    ReplyDelete
  120. Anonymous29 May 2017 at 07:21

    this blog is great .....
    online baccarat
    บาคาร่า
    baccarat

    ReplyDelete
  121. Anonymous4 August 2017 at 16:32

    Thanks for your insight for your fantastic posting. I’m glad I have taken the time to see this.
    smartphone flash tool

    ReplyDelete
  122. assurancereality5 August 2017 at 06:43

    My tecno dp7cpro is totally dead, please what can i do to unbrick this device ?

    ReplyDelete
  123. Unknown11 September 2017 at 07:24

    This is helpful

    ReplyDelete
  124. The 2024 game changer.12 September 2017 at 23:23

    I'm having an issue flashing tecno phantom z mini. After downloading using sp flash tool, my phone goes dead right after the 100% of the red line. So my question is, when is the time to put off the phone. Please someone elaborate on the flashing steps. It's giving me stress.

    ReplyDelete
  125. The 2024 game changer.13 September 2017 at 08:58

    I'm having an issue flashing tecno phantom z mini. After downloading using sp flash tool, my phone goes dead right after the 100% of the red line. So my question is, when is the time to put off the phone. Please someone elaborate on the flashing steps. It's giving me stress.

    ReplyDelete
  126. Wolfram Mathematica 11 Crack + Activation11 October 2017 at 16:08

    I am very grateful for this enlightening article. I am new to this issue, but for me it elucidated several questions. Congratulations on your knowledge on the subject. Thank you very much.Wise Folder Hider Pro 4.22

    ReplyDelete
  127. Unknown12 October 2017 at 15:43

    Hi, TECNO t733 can't power on & I have tried to download a number of firmware (s) but all can't power on the phone 📱.
    Bad luck enough can't get undamaged phone to read. Needs your assistance please!

    ReplyDelete
  128. Nana6 November 2017 at 07:17

    pls how can i flash tecno ptm-z-min G870-A1-kk-20141209

    ReplyDelete
  129. Nana6 November 2017 at 07:27

    my PTM-Z-mini G870-A1-kk-201412209 keept on freezing when am making call or playing but when i didnt use it for anything it stable. please can someone help me

    ReplyDelete
    Replies
    1. Amparas Teekaay7 November 2017 at 04:52

      You do not need to flash your phone. The main chip inside your device is getting bad. ie when you are using your phone the temperature of the chip rises which makes it expand and this will make the device freeze. If can solve the advice problem then your device will be fine 😁

      Delete
    2. Nana7 November 2017 at 23:11

      so please how can i sovle is pls help me

      Delete
  130. Nana7 November 2017 at 23:20

    ...how can i sovle it from freezing pls show me how it can be sovle.is there anyway

    ReplyDelete
  131. bile9 November 2017 at 10:58

    my infinix does not start anymore after changing the rom stock with flash tool. in addition to that, I have no signals when I connect usb
    what to do to recover my phone?

    ReplyDelete
  132. and175414 November 2017 at 22:52


    hello please me !!!

    Help me bricked a device from a client and can not get disbricked.

    in the flash tool the following message appears:

    ERROR: S_SECURITY_SEND_AUTH_FAIL (6029), MSP ERROE CODE: 0x00.

    [HINT]:

    In my searches it is the: authentication file.

    But I could not find any authentication files for this device.

    PLEASE IF SOMEONE HAVE THIS AUTHENTICATION FILE I AVAILABLE A LINK TO DOWNLOAD, OR IF YOU KNOW ANOTHER DISTRICTED WAY FOR THIS APPLIANCE TO GUIDE ME.

    PLEASE HELP ME!!!

    Brand: MOTOROLA
    Model: XT1754
    Model MTK: MT6737M
    Popular Name: MOTO C 4G XT1754

    ReplyDelete
  133. Unknown19 November 2017 at 14:46

    hi, the sp flash tool can't detect my tablet (tecno s9s), what is the issue and what step could i have missed?

    ReplyDelete
    Replies
    1. Amparas Teekaay21 November 2017 at 04:58

      If your PC can see the tablet when you are not trying to flash it, then you have not installed mtk vcom drivers properly. If not, your usb port has issues

      Delete
  134. althair3 December 2017 at 23:51

    Error S_Security_Send_Auth_Fail (6029) on Meizu M2 Mini, please help

    ReplyDelete
  135. Redemta23 December 2017 at 07:11

    I flashed a Tecno m3 successfully but it's no longer powering on,what could be the problem?

    ReplyDelete
  136. Unknown6 January 2018 at 19:31

    Hi buddy, am unable to find to know the kind of stock ROM I need. My phone is Tecno C7. That's what I see when I remove the battery. I also see IMEI numbers, QR codes S/N. Please help!

    ReplyDelete
    Replies
    1. Amparas Teekaay7 January 2018 at 14:35

      Normally u just have to check the build number of the device then I see if it matches that of the firmware to download. But if you don't have access to the build number, Just download the latest firmware of Tecno c7 and flash your device

      Delete
  137. Unknown17 February 2018 at 20:37

    Sorry for my poor english.
    My device is only recognised as "usb device" and not as " mtk device" i tried a lot of driver a lot of time and the problem is the same. I work on a hard bricked Xperia c4 and Windows 10. Thanks to help me because i m gonna be crazy

    ReplyDelete
    Replies
    1. Amparas Teekaay18 February 2018 at 07:13

      Simply download and install flashtool for Sony Xperia devices. The full driver is found inside the installation package ie C:\flashtool\drivers

      Delete
  138. Unknown18 February 2018 at 14:17

    I tried this but the same issue....my device is recognized directly as "Peripherique serie USB (COM5)....Help

    ReplyDelete
  139. Unknown25 February 2018 at 12:23

    Please sir how do I fix this error ( [DA_ERROR] : DRAM Configure failed! )

    ReplyDelete
  140. Adamsmaxco5 April 2018 at 10:15

    hi bros, i flash a tecno y2 without checking the boot number and now it is not coming on again and is not connecting with sp flashtool again, only miracle. please help me with a file that i can to wake it up. thanks

    ReplyDelete
  141. Adamsmaxco5 April 2018 at 10:17

    i mean i flashed a tecno y2 without checking the build number so now the phone is completely dead, no powering on and is not even connecting to sp flashtool, just connect miracle box. please i don't know if you can help me

    ReplyDelete
  142. Adamsmaxco5 April 2018 at 10:52

    the tecno y2 is connecting to sp flashtool but not passing the red 100% nd it will display an error with the message enable dram failed

    ReplyDelete
  143. Zigla Aboubakar24 May 2018 at 10:04

    merci j'ai flasher

    ReplyDelete
  144. Unknown22 June 2018 at 13:48

    how will i know the exactly rom to download for tecno w3

    ReplyDelete