Note
Follow the instructions on how to flash the device carefully from the tutorials below
I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong preloder will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)
I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong preloder will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)
TECNO H7 SPECS
Dimensions: 143.5 x 72.7 x 8.75 mmStorage: 4GB ROM up to 32GB microSD card
Memory: 1GB RAM
Display: 5-inch IPS Touch Display (540 x 900 pixels, 200 ppi)
Rear Camera: 8 MP Camera with Flash, 720p HD Video, Autofocus
Front Camera: 2 MP Secondary Camera
Platform: Android 4.2.2 OS (Jelly Bean)
Processor: 1.3GHz Dual-core Processor
Front Camera: 2 MP Secondary Camera
Platform: Android 4.2.2 OS (Jelly Bean)
Processor: 1.3GHz Dual-core Processor
MediaTek MT6582
GSM/EDGE 900/1800MHz
WCDMA 2100MHz
3.75G Internet (Up to 21 Mbps)
2020 mAh Li-ion Battery Capacity
GSM/EDGE 900/1800MHz
WCDMA 2100MHz
3.75G Internet (Up to 21 Mbps)
2020 mAh Li-ion Battery Capacity
TECNO H7 STOCK ROM
H7-QP16-150228
H7-QP16-140710
DOWNLOAD
************************************************
TECNO H7S STOCK ROM
H7S-LTE-MQ16-141104
************************************************
TECNO H7S STOCK ROM
H7S-LTE-MQ16-141104
DOWNLOAD
***************************************************
TECNO H7 PLUS STOCK ROM
H7-PLUS-QP16
***************************************************
TECNO H7 PLUS STOCK ROM
H7-PLUS-QP16
DOWNLOAD
How to flash TECNO devices using WiseLink Tool
Report if you cannot download any of
these files.
Donate to support this site
How to flash TECNO devices using SP
Flash Tool
Download,
latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
For a more detail guide with video and pictures on how to use SP
Flash Tool, click here
How to flash TECNO devices using WiseLink Tool
Download
and install the latest version of WiseLinkTool
Launch WiseLink Tool
Tick off-line log in then click Open RegCode File and select the zzzzzzzzzzzzz.key.
After selecting the file, Click OK to launch.
Click the Browse button (...) on Scatter Loading File
Navigate and select the scatter file inside stock ROM folder
Click Download button
Turn off device and connect to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
Launch WiseLink Tool
Tick off-line log in then click Open RegCode File and select the zzzzzzzzzzzzz.key.
After selecting the file, Click OK to launch.
Click the Browse button (...) on Scatter Loading File
Navigate and select the scatter file inside stock ROM folder
Click Download button
Turn off device and connect to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
For a more detail guide with video and pictures, on how to use WiseLinkTool,
click here
You
can also use other tools like SP
Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash
this device
Pls. I need Tecno M6 stock rom
ReplyDeletebaba you too much, been looking for this
ReplyDeletenice....thanks
ReplyDeleteplease this rom with arabic support?
ReplyDeleteIt has many languages inside. I believe arabic will be one
DeleteI got my h7 bricked and couldnt boot into recovery how do i install this on ir
ReplyDeletePls after flashing my phone won't go away from tecno what should I do
ReplyDeleteWipe factory reset from recovery mode
ReplyDeleteAnd if that doznt work,,,do a clear emmc using power button + volume down
ReplyDeleteAnd if that doznt work,,,do a clear emmc using power button + volume down
ReplyDeletepls help me out my stock rom is H7-QP16-140721, MY NETWORK SIGNAL IS NOT STABLE SOME TIMES IF I WANT TO MAKE CALL MY NETWORK WILL JUST GO OFF AT WILL. I TRY USING THE ROM YOU POST STILL THE SAME PROBLEM PLS WHICH WAY OUT.
ReplyDeleteI dont think flashing your device will solve your problem. Try changing the network antenna or ic
Deletebro is dr a kitkat version or lollipop android upgrade version of TECHNO H7 fnks
ReplyDeleteNope there's none.
DeleteOkay but is Dr a realistic chance of any update coming out soon?
ReplyDeleteNope no updates. Its been almost 2yrs since the phone was released I'm sure Tecno already forgot about it already :D
DeleteAlso d h7s and h7 plus stock roms are 4. Which phones?
ReplyDeletePlease can u upload the stock ROM for x-touch x4 plus please
ReplyDeletePlease I need stock Rom of X4 plus (android 5.1,)
Deletehey buddy...can that rom also work for h7-qp16-14072...?
ReplyDeletehello bro. i clicked the download link for tecno h7 stock rom but it took me to a bet site. pls help me forward the stock rom for tecno h7 to my mail at [email protected] pls... thanks
ReplyDeletePlease how do I know/check which H7 I'm using, I mean the numbers that follows after the H7 e.g "H7-qp16-14072"
ReplyDeletePls i have tecno y3, the sim management is disabled, it only shows one imei and also diesn't recongnise sim but the sim port is okay. Any solution pls it's urgent thanks
ReplyDeleteHey! my h7 was bricked, d custom build version is "H7-QP16-140628" is not listed above.. but can i use any of d top ones? or i must use d 1 dat match wit d numbers?
ReplyDeletei also have s same issue.. did u try any one and it which worked
DeleteAfter flashing the rom to 21% it cancelled and gave me error 4032 in sp flash tools. I've used every stock rom of h7 i can. Plz help ppl
ReplyDeletepls, i flashed tehno h7 after which it does not power on again, what do i do?
ReplyDeletehey thanks for da good advise u give to us during when we have failed to make it rite,me i have 2 h7 tecno 4nes but totally they don't respond on da computer any solution please
ReplyDeleteRead how to fix it here
DeleteIF YOU DON'T WANT TO BRICK YOUR H7, YOU'D BETTER NOT FLASH "H7-QP16-140721". I DON'T KNOW ABOUT OTHER ROMs.
ReplyDeleteIs there any Custom ROM for Tecno R7 please
ReplyDeleteI haven’t any word to appreciate this post.....Really i am impressed from this post....the person who create this post it was a great human..thanks for shared this with us.
ReplyDeletehow to use sp flash tool
thanks boss. my uncle's was invaded by virus. i used the last rom of H7 up here to revive it...but unfortunately, it brings invalid imei....thank GOD for MTK Engineering tool that bailed me out. I appreciate you, sir.
ReplyDeleteI don't really understand when to use a particular stockrom from different varrities. Please could anybody help me explain this using the varrities of TECNO H7.
ReplyDeleteThanks in anticipation.
I don't really understand when to use a particular stockrom from different varrities. Please could anybody help me explain this using the varrities of TECNO H7.
ReplyDeleteThanks in anticipation.