Note
Follow the instructions on how to
flash the device carefully below
I will not take responsibility on
whatever may happen to your device.
Flash at your own risk!
Make sure you are downloading the
exact ROM of the device you want to flash because
flashing a wrong firmware, can
render the device useless
(can't power on, can't charge and
will not be detected by a computer)
How to flash SPD devices with Research
Download or UpgradeDownload Tool
Download an
install SPD drivers from here
Extract and Launch
Research Download/UpgradeDownload Tool
Click on load icon
Navigate to the
folder containing the firmware
Select the pac
file in the firmware folder
Wait for it to
load in Research Download/UpgradeDownload tool
Click Play/Start
button
Now connect the
device to PC while holding volume down key
(Some new devices
requires holding volume up key)
Wait for flashing
process to complete
When you see
Passed! Then note that the flashing or upgrading process is complete
Disconnect and
boot up device
You can also use tools like Miracle
Box, infinity CMII, Volcano, GPG
Dragon etc to flash or upgrade SPD devices
ITEL IT1352 QUICK SPECS
Android 4.1 (Jelly Bean)
Dimensions - 140.2 x 74.5 x 10.6 mm
4.5-inch Touchscreen, 480 x 854 , IPS 218 ppi
1.0GHz SC7710
512 MB RAM
512 MB Internal Memory
Supports up to 8GB microSD
3 MP Rear Camera, LED Flash,
Dual SIM
EDGE / GPRS
UTMS
WIFI 802.11 b/g/n
bluetooth 2.0
1200mAh Battery
ITEL 1352 STOCK ROM
Please Leave a comment after using this ROM
Like and Share
Like and Share
Report if you cannot download this file.
ITEL 1352 IS A GOOD ROM FLASH SUCCESS THINKS ROMKINGZ
ReplyDeleteI flashed this on my phone and got a wrong variant in the middle and the phone has been dead and not detected by the pc again, any help on this
ReplyDeletea dan dedo
Delete