Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk!
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong firmware, can render the device useless
(can't power on, can't charge and will not be detected by a computer)
How to flash SPD devices with Research Download or UpgradeDownload Tool
Download an install SPD drivers from here
Extract and Launch Research Download/UpgradeDownload Tool
Click on load icon
Navigate to the folder containing the firmware
Select the pac file in the firmware folder
Wait for it to load in Research Download/UpgradeDownload tool
Click Play/Start button
Now connect the device to PC while holding volume down key
(Some new devices requires holding volume up key)
Wait for flashing process to complete
When you see Passed! Then note that the flashing or upgrading process is complete
Disconnect and boot up device
You can also use tools like Miracle Box, infinity CMII, Volcano, GPG Dragon etc to flash or upgrade SPD devices
ITEL 1450 SPECS
Android 2.3 (Ginger Bread)
Dimensions - 140.2 x 74.5 x 10.6 mm
4.5-inch Touchscreen, 480 x 854 , IPS 218 ppi
1.0GHz SC7710
512 MB RAM
512 MB Internal Memory
Supports up to 8GB microSD
3 MP Rear Camera, LED Flash,
1.3 MP Front Camera
1.3 MP Front Camera
Dual SIM
EDGE / GPRS
WIFI 802.11 b/g/n
bluetooth 2.0
1800mAh Battery
ITEL 1450 STOCK ROM
Please Leave a comment after using this ROM
Report if you cannot download this file.
Thanks for sharing
ReplyDeletethanks
ReplyDeletethanks for all this....I NEED THE 1450E one please
ReplyDeleteSearch your model from this link:
Deletehttp://interallsoftware.blogspot.com/
After flash my phone with this file, display white now but my phone Bord ID is A39A_MB_V2.1
ReplyDeleteAny one help me plz
This comment has been removed by the author.
ReplyDelete