Follow the instructions on how to flash the device carefully.
I will not take responsibility on whatever may happen to your device.
To Flash any of the ROMs below,
Extract the file downloaded
Launch UpdateTool.exe which is inside the Android 2.3 Update Tool folder
Click START
Make sure battery of phone is about 25%
Turn off the phone
Connect phone to PC while holding volume down button
Wait for process to complete.
To Flash any of the ROMs below,
Extract the file downloaded
Launch UpdateTool.exe which is inside the Android 2.3 Update Tool folder
Click START
Make sure battery of phone is about 25%
Turn off the phone
Connect phone to PC while holding volume down button
Wait for process to complete.
TECNO P3 SPECS
Android 2.3.5 (Ginger Bread)
Dimensions - 115.8 x 62 x 11.7 mm
3.5-inch Touchscreen, 320 x 480 , 165 ppi
800MHz dual-core Processor
512MB RAM
512 MB Internal Memory
Supports up to 32GB microSD
3 MP Rear Camera, LED Flash
0.3 MP Front Camera
Dual SIM
EDGE / GPRS
HSDPA
WIFI 802.11 b/g/n
bluetooth 2.0
1400mAh Battery
TECNO P3 STOCK ROM
P3-D107-CY-A1-V0.10.3-S0925
DOWNLOAD ROM
TECNO P3 STOCK ROM ETISALAT VERSION
DOWNLOAD ROM
TECNO P3S STOCK ROM
P3S-D107-Safaricom-N6
The ROM below was made using stock recovery.
TECNO P3 STOCK ROM BACKUP
DOWNLOAD ROM
To flash this ROM backup to your device,
Download and extract the ROM
Create an new folder in your SD Card
Copy ROM contents into the new folder created in your SDcard
Boot into stock recovery (Press and hold volume up + Power for about 5secs)
Use volume keys to navigate to Backup and Restore
Select Restore with Power Button
Select the folder you copied the contents of the ROM
Wait for process to complete..
Please Leave a comment after using this ROM
P3-D107-CY-A1-V0.10.3-S0925
DOWNLOAD ROM
TECNO P3 STOCK ROM ETISALAT VERSION
DOWNLOAD ROM
TECNO P3S STOCK ROM
P3S-D107-Safaricom-N6
The ROM below was made using stock recovery.
TECNO P3 STOCK ROM BACKUP
DOWNLOAD ROM
To flash this ROM backup to your device,
Download and extract the ROM
Create an new folder in your SD Card
Copy ROM contents into the new folder created in your SDcard
Boot into stock recovery (Press and hold volume up + Power for about 5secs)
Use volume keys to navigate to Backup and Restore
Select Restore with Power Button
Select the folder you copied the contents of the ROM
Wait for process to complete..
Please Leave a comment after using this ROM
Report if you cannot download this file.
good job. boss. but please am really in need of tecno p6 stock rom please help please. my email [email protected]
ReplyDeleteafter flash tecno p3 with his room my phone boot in white screen and not enter recover i flash with Android_AIO_Flasher_1.00
ReplyDeleteUse the below formular next time. It will surely work
DeleteBig thanks to you. You did well by giving this free. I collected 1k to flash phone in my working place. Freely have i received and free tutorial will i give on how it worked for me.
ReplyDeleteHow to flash:
1. Extract all files to one folder.
2. Press vol down and connect USB.
3. Click on start.
4. The flash process will not start. Leave the phone for a while. Wait 1-2 minutes (Depending on your PC)
5. Click on start==right-click my computer==properties then Device manager on your PC.Any other means on getting to your PC device manager is allowed.
6. You will see 3 or 4 Qualcomm Atheros.... with yellow signal. Meaning that the device is not derived. Now right-click on each of them and click on Update Driver Software... Click on Browse My computer for driver software...Now navigate to the folder you you you extracted before i.e (Android2.3UpdateTool_V1.0.2.7). Click on next and the driver will be installed. If there is any pop up asking you to install device driver...Go ahead and click install.
After successful installation reconnect the phone and you will be good.
Call for assistance 08068591267. No spamming
Special thanks to Bro Amparas Tking for this platform
Do we need Administrator here?
hi i'm muhamad from tanzania i would like to know what u did step wise till success.
Deleteif possible could i have your detailed contact?
Pls I flashed the P3 phone now and after flashing it boot up with white screen is like the variant of that file is quite different from mine can I see another file for my p3 pls.... Thnx Admin.....
ReplyDelete@ulusola me too got that white screen after flash with TECNO P3 are ufix that problems brooh
DeleteTECNO P3 SPRD 6820_2.3.5_gc925_jyz_mt11_v11 any1 help me 4 this room
ReplyDeletehow do u know the variant to use?
ReplyDeletethank you so much, it worked for me
ReplyDeletepls wat scatter file does tecno p3 use
ReplyDeletePlease i forgot how to backup rom for TECNO P3, so anyone can remember me how to backup flash because i've a alive Tecno P3 variant 2 which i saw many people shout about white screen after flash.
ReplyDeleteI'll upload that file to my MEGA if i can manage to backup rom from my working phone.
Please i forgot how to backup rom for TECNO P3, so anyone can remember me how to backup flash because i've a alive Tecno P3 variant 2 which i saw many people shout about white screen after flash.
ReplyDeleteI'll upload that file to my MEGA if i can manage to backup rom from my working phone.
MY TECNO P3 HAVE NO VOL UP AND DOWN KEYS
ReplyDelete