Note
Follow
the instructions on how to flash the device carefully below
I
will not take responsibility on whatever may happen to your device.
Flash
at your own risk..
Make
sure you are downloading the exact ROM of the device you want to flash
because
flashing
a wrong preloader, will make the device completely dead
(can't
power on, can't charge and will not be detected by a computer)
How to flash MTK devices using SP Flash Tool
Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
You can also use other tools like WiseLink, SP Multiport Download, Miracle
Box, Volcano, Infinity CMII etc to flash this device
TECNO P6 QUICK SPECS
Android 4.4 (KitKat)
Dimensions - 143 x 71.9 x 8.93 mm
4.5-inch Touchscreen, 540 x 960 , IPS 245 ppi
1.3GHz quad-core Processor
MT6582
Mali 400MP2 GPU
MT6582
Mali 400MP2 GPU
1GB RAM
8GB Internal Memory
Supports up to 32GB microSD
8 MP Rear Camera, LED Flash, Auto Focus
2 MP Front Camera
Dual SIM
EDGE / GPRS
WCDMA
WIFI 802.11 b/g/n
bluetooth 3.0
1800mAh Battery
it does not download it goes to this link https://www.multcloud.com/download/C6CE8EE6-4170-0001-33FE-15D0A9D01584
ReplyDeletewe really appreciate your effort concerning the stock rom, but the problem is where some of the rom are stored, tecno p6 stop at 84% and refuse to resume download because of the drive where the roms are stored. almost 1.5GB gone, the wasted gigabyte is not even the issue but pls. we want you to do something about the muiltycloud drive, tecno L7, Y3b and some others are affected too. thanks once again for your effort.
ReplyDeleteHahahaha Vester I understand what you are saying. I simply need more space on google drive to transfer the files.Soon the files will be transfered
DeleteOk, thanks
ReplyDeleteplease the p6 rom is not downloading, please help me out
ReplyDeleteThank you so much.
ReplyDeleteMine hav 5 mp front camera and that stock hav 2 mp frond am dont get it this is At all its to west the time and to Phone gone slo
ReplyDeleteMine hav 5 mp front camera and that stock hav 2 mp frond am dont get it this is At all its to west the time and to Phone gone slo
ReplyDeleteplease my iPhone is on Icould lock please how can i remove icloud from the phone please here Is my email [email protected] please help me
ReplyDeleteplease brotherb do something about this p6 rom is just waisting my data thanks you sir
ReplyDeleteuse this working link http://adf.ly/1dn5s1
ReplyDeleteGOOD WORK
ReplyDeletePlease can tecno p6 be upgrade to higher operating system
ReplyDeleteYes, it can. You should have rooted it and downloaded the rom of the the new version.
ReplyDeleteHowever, you must check out for compatibility or you should watch out for it. If you have any issues, you can revert back to your backup, and try out another Rom.
I enjoyed Tecno P6 but one issue I had that made me to want to install a new Rom was the issue of lockscreen. I didn't remember setting up a sim lock but that was how I couldn't get into my own phone.
Years later, I decided to write this post for those who may experience the same issue. Here Unlock Android Sim Lock
Try new link here Unlock Android Sim Lock
ReplyDelete