DOWNLOAD TECNO P9 STOCK ROM


Learn how to unbrick/flash this device using sp flash tool from here
Learn how to flash this device using SP MultiPortDownloadTool from here 
Learn how to flash this device using WiseLinkTool from here

Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloder, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

TECNO P9 SPECS 

Android 4.4 (KitKat) & Android 4.2 (Jelly Bean)

7-inch Touchscreen, 800 x 1200 , IPS 272 ppi 

1.2GHz quad-core Processor

1GB RAM
8GB Internal Memory 
Supports up to 32GB microSD

5MP Rear Camera, LED Flash, Auto Focus
2MP Front Camera 

Dual SIM
EDGE / GPRS 
WCDMA
WIFI 802.11 b/g/n
bluetooth 3.0

4000mAh Battery


TECNO P9 STOCK ROM

 P9-T102-20150311
DOWNLOAD ROM 

P9-T102-20141103
DOWNLOAD ROM 


 The above ROM is  for the Android 4.4 version only (MT6582)
Please Leave a comment after using this ROM
Report if you cannot download this file.
Posted by
Labels: , ,

16 comments:

  1. l922 October 2015 at 20:02

    une remerciement pour le job et pour le partage

    ReplyDelete
  2. Unknown23 November 2015 at 00:44

    i cant download it cos it doesnt support resume

    ReplyDelete
  3. Unknown20 February 2016 at 08:03

    Please i need them 4.2 version please

    ReplyDelete
  4. Admin16 April 2016 at 22:29

    pls help, if i plug my phone to charge it just continue discharging after I flashed it with this rom

    ReplyDelete
  5. Unknown6 July 2016 at 22:34

    Pls same thing happened to my p9 too after flashed.pls any solution to this

    ReplyDelete
  6. Unknown24 July 2016 at 15:22

    My phone did not charge over 9% after flashing my P9 with this rom

    ReplyDelete
  7. Unknown11 August 2016 at 11:12

    My tecno p9 not increase charging after I use this rom, pls boss help us don't ignore us ooo

    ReplyDelete
  8. 4luv17 August 2016 at 12:42

    av anybody see solution to this charging not increase more than 8 percent for tecno p9???????

    ReplyDelete
    Replies
    1. Amparas Teekaay17 August 2016 at 15:43

      All you need is to flash it again with this firmware P9-T102-20141103 but I've not had the time to upload it

      Delete
    2. Unknown16 December 2016 at 13:01

      Please I used the above stock rom for tecno P9-T102-20141103 to flash my phone but refused to charge after the flashing process.please help,what should I do.

      Delete
  9. kwadex11 December 2016 at 01:50

    This comment has been removed by the author.

    ReplyDelete
  10. Unknown13 December 2016 at 17:39

    i need 6589 techno p9 firmware

    ReplyDelete
  11. Unknown23 January 2017 at 17:59

    Pls Boss I need p9 T101 442 pls. Or can T102 Work on it? Pls

    ReplyDelete
  12. Engr Timmaj18 February 2017 at 14:56

    pls ooooo... i need P9 6589 stock rom....

    ReplyDelete
  13. Erhiskobi3 March 2017 at 20:10

    I flashed a tecno P9 with the P9-T102-20141103 ROM and the phone isn't charging. What to do?

    ReplyDelete
  14. adam15 January 2018 at 07:51

    what partition should one uncheck to avoid the effect of not charging?

    ReplyDelete

Subscribe to: Post Comments (Atom)

Related Posts

Related Posts Plugin for WordPress, Blogger...