Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong preloder, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)
INNJOO FIRE SPECS
Android 4.4 (KitKat) 3G version
Android 5.1 (lollipop) for LTE version only
Android 5.1 (lollipop) for LTE version only
5.5-inch Touchscreen, 720 x 1280 pixels IPS
1GHz quad-core Processor LTE version
MT6735P chipset
Mali - T720
1.4 quad-core processor 3G version
MT6592M
MT6735P chipset
Mali - T720
1.4 quad-core processor 3G version
MT6592M
Mali - 400MP GPU
2GB RAM
16 GB Internal Memory
Supports up to 128GB microSD
13 MP Rear Camera, LED Flash, Auto Focus
5 MP Front Camera
Dual SIM
EDGE / GPRS
WCDMA
LTE
LTE
WIFI 802.11 b/g/n
bluetooth 4.0
3600mAh Battery
560Mb
Please Leave a comment after using this ROM
Report if you cannot download this file.
pls i cloud not download this flie it stop at 99.99
ReplyDeletewhat if while flashing the process was interrupted . what should i do ?
ReplyDeleteReflash if the phone is still detected by PC,
DeleteIf PC cannot detect the phone again, read this post here
Hello. I bought this phone with android 4.4 but I want to change it to 5.1. Can I load it with the 5.1 here?
ReplyDeleteplease sir,my innjoo fire 2 3G is not display after flashing
ReplyDeleteThe modem of your phone is either not calibrated or calibrated badly. Use SN Write Tool or Maui Meta 3G to calibrate.
DeleteThis comment has been removed by the author.
ReplyDelete