Note
Follow
the instructions on how to flash the device carefully below
I
will not take responsibility on whatever may happen to your device.
Flash
at your own risk!
Make
sure you are downloading the exact ROM of the device you want to flash
because
flashing
a wrong firmware, can render the device useless
(can't
power on, can't charge and will not be detected by a computer)
How to flash SPD devices with Research Download or
UpgradeDownload Tool
Download an install SPD drivers from here
Extract and Launch Research Download/UpgradeDownload Tool
Click on load icon
Navigate to the folder containing the firmware
Select the pac file in the firmware folder
Wait for it to load in Research Download/UpgradeDownload
tool
Click Play/Start button
Now connect the device to PC while holding volume down
key
(Some new devices requires holding volume up key)
Wait for flashing process to complete
When you see Passed! Then note that the flashing or
upgrading process is complete
Disconnect and boot up device
You
can also use tools like Miracle Box, infinity CMII, Volcano, GPG Dragon etc to flash or upgrade SPD devices
ITEL 1407 SPECS
ITEL 1407 SPECS
Android 4.4(KitKat)
4.5-inch Touchscreen, 480 x 854 , IPS 218 ppi
1.2GHz SC7710
512 MB RAM
512 MB Internal Memory
Supports up to 8GB microSD
2 MP Rear Camera, LED Flash,
0.3 MP Front Camera
0.3 MP Front Camera
Dual SIM
EDGE / GPRS
WIFI 802.11 b/g/n
bluetooth 2.0
1500mAh Battery
ITEL 1407 STOCK ROM
IT1407_W403_20160108
IT1407_W403_20160108
DOWNLOAD ROM
IT1407_C219_20160411
IT1407_W403_20151228
IT1407_W403_20151007
DOWNLOAD ROM IT1407_C219_20160411
DOWNLOAD ROM
IT1407-W403-SN-TIGO-20160226
Senegal Tigo Network
DOWNLOAD ROMSenegal Tigo Network
IT1407-W403-SN-TIGO-20160119
Senegal Tigo Network
DOWNLOAD ROMSenegal Tigo Network
Please Leave a comment after using this ROM
Report if you cannot download this file.
workd fine good job
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteHow to hard reset it when u forgot password
ReplyDeleteUse Miracle Box and select reset code under spreadtrum tab
Deleteafter flashing with this rom display went white please help
Deletewhite screen after flash.
ReplyDeletei hard reset my sister`s itel 1t1407 and after that google is asking for previous google account. she cant remember her password android version 5.1
ReplyDeleteany idea how to bypass this
Do factory reset again...using volume down and power but u need to press power before volume down .... press power and immediately and press volume down and do rest again using rest at the bottom of the list pop up....
DeleteContact me at Facebook..... User name Kwao Alba Stanley
itel 1407 file wont finish to flash
ReplyDeletewhite as well whats the solution
ReplyDeletetry flashing with another rom,latest
Deleteitel 1407 frp lock solution
ReplyDeletewhite screen after flash
ReplyDeletefrp lock solution
ReplyDeleteGo here
DeleteAider moi j'ai besoin de se stock rom it1407 C219-20160603 merci
Deletemaster tk welld done
ReplyDeletei-tel 1407 after using these stock rom c219_20160411 phone keep on showing unfortunately,the process com.android has stopped pls help what is the solution.
ReplyDeleteSame here too. I've tried every solution I could get online, yet without any positive result. I guess the only solution is to reflash with similar ROM but it seems the one above is the only available ROM online for lollipop version of IT1407. Has anyone got a solution yet?
DeletePlease kindly help us, admim.
SAME PROBLEME UNFORTUNATEALY AFTER FLSH ROM GEVIN SLTION
ReplyDelete1407 C219-20160411 AFTER FLASHING SHOWING UNFORTUNATELY...
ReplyDeletepls i ned itel 1407 version 5 googgle acount solution,i download 1 but it seems is 4version am afraid 2use it,cos i have1 dat i flash itel 1403 d scren start showing white nd i hav been using d file 4 vry long time dnt no y d screen showin dat,am tryin 2check d new scren nd c
ReplyDeleteafter flashing shows unfortunately
ReplyDeleteThe one I'm having rights here with me is running android 5.1 lollypop...if I write it with the one provided above, is it gonna work or it'll kill the phone since the provided rom version is 4.4???
ReplyDeleteCheck the build number of your device then flash with the one that it matches
DeleteWhot can be the cause the phone refuse to flash it still stuck on ftl failed is there any solution to fix this problem
ReplyDeletePhone keeps telling unfortunately phone has stopped... After flashing with the c219-20160411
ReplyDeletehow wey u able to flash the ROM c219-20160411 I can't flash it Herr am just getting this error user art error ,unplugged by user
ReplyDeleteEnter your reply...use another usb cable&make sure battery got enough power.this issue is mosly battery with low voltage.
Deletei hav tryed to flash my itel 1407 it is showing fail
ReplyDeleteBINGO!!! I just hard rested my itel 1407 android phone!
ReplyDeleteits so simple guys!
contact Swalleh Abdul on +254716246351 OR +254708924772
Hi, and thanks for the good work.
ReplyDeletePlease can you kindly help to upload the lollipop stock rom in any other sites aside MEGA? I've really not been able to download from the site. Please sir, kindly help me as my phone is bricked now and only the lollipop version matches my phone build.
If you don't mind, you can even send it to my email, sir. Please help me, this is very urgent.
My email is: (dddovely at gmail.com)... written like that to avoid bots.
Thanks.
Thanks! I later downloaded it using a PC. However after flashing the C219-20160411 build that matched my phone, I did get the error "unfortunately the process com.android.phone has stopped". I've tried some possible solutions suggested online but none worked.
DeletePlease kindly help me out, @Amparas TKing.
Well just extract the system.img file found in W403-20160108 pac file then flash your phone with it using the following fastboot command >>
Deletefastboot flash system system.img
After that reset the device. You can also use fastboot command >>
fastboot erase userdata
reboot device and enjoy. You can still use fastboot command >>
fastboot reboot
Hope this helps ;)
Thanks Admin. I had extracted the system.img from the W403 variant you gave above but flashing it into the phone is what I'm not really getting right. I'd tried using fastboot as you specified but I couldn't get the file in. Though,I'm new to using fastboot on pc anyway.
ReplyDeleteHere's how I did it:
I extracted the platform tools, moved the system.img into the folder, and ran the command line. The response was , whereas adb showed that my phone was attached.
In fact, no fastboot command showed any response from the phone.
Please kindly explain the process a little further. Thanks very much for your time.
Hey, I just tried it now following the steps on xda forum and it responded. However, it was showing this error:
ReplyDeletetarget didn't report max-download-size
sending 'system' (546872 KB)...
FAILED (remote: data too large)
finished. total time: 0.047s
What could I do next?
I guess I've started to understand this. The system.img file is about 547mb while the internal ram is just 512. Is there anyway to reduce the size, or should I zip it and flash?
DeleteHey, I was able to flash it later using UpgradeTool by extracting and replacing the system.img in the C219 variant with the W403 system.img but the phone now hangs at the bootloader. Thinking it might be compatibility problem, so I flashed back the C219 system.img and the phone worked but, you know, the problem was still there.
ReplyDeleteIs there anywhere to flash in the new system.img without the phone getting bricked?
Moreover, is the problem really in the system.img file of the C219 variant? If yes, can you kindly help us to get a new variant for lollipop? Only you and naijarom have the lollipop variant and it is the same.
Please kindly help us out. Your response will be very appreciated.
i have a solution rom for both adriod 4.4 n 5.1 need jhus to upload t to this site jhus dat
ReplyDeleteWhere is the solution
DeleteAider moi j'ai besoin de se stock rom it1407 C219-20160603
ReplyDeleteI've faced that problem too when i'v flashed it with c219... unfortunately com.phone.android has sptopped
ReplyDelete