Note
Follow the instructions on how to
flash the device carefully below
I will not take responsibility on
whatever may happen to your device.
Flash at your own risk!
Make sure you are downloading the
exact ROM of the device you want to flash because
flashing a wrong firmware, can
render the device useless
(can't power on, can't charge and
will not be detected by a computer)
How to flash SPD devices with Research
Download or UpgradeDownload Tool
Download an
install SPD drivers from here
Extract and Launch
Research Download/UpgradeDownload Tool
Click on load icon
Navigate to the
folder containing the firmware
Select the pac
file in the firmware folder
Wait for it to
load in Research Download/UpgradeDownload tool
Click Play/Start
button
Now connect the
device to PC while holding volume down key
(Some new devices
requires holding volume up key)
Wait for flashing
process to complete
When you see
Passed! Then note that the flashing or upgrading process is complete
Disconnect and
boot up device
You can also use tools like Miracle
Box, infinity CMII, Volcano, GPG
Dragon etc to flash or upgrade SPD devices
ITEL 1505 QUICK SPECS
Android 5.1 (Lollipop)
Dimensions - 141.5 x 70.2 x 8.0 mm
5-inch Touchscreen, 720 x 1280
1.2GHz quad core
1 GB RAM
8GB Internal Memory
Supports up to 32GB microSD
8 MP Rear Camera, LED Flash,
2 MP Front Camera
2 MP Front Camera
Dual SIM
EDGE / GPRS
WIFI 802.11 b/g/n
bluetooth 3.0
2500mAh Battery
ITEL 1505 STOCK ROM
IT1505-Z103-CTS-20151008
IT1505-Z103-CTS-20151008
THE SRENN IS WITE AFTER FLASH
ReplyDeleteHmmmmmm please am have issues it stops on fdl2 please help
ReplyDeletedead after flash
ReplyDeleteRom king please have seen it1505 and it1501 at the download side so which is which?
ReplyDeleteBlack screen after flash
ReplyDeleteblack screen after flash.... help
ReplyDeleteblack screen after flash. tried with both files and same error. help
ReplyDeletePhone dead after flash with both files. blue screen now. please delete these files and upload the correct ones.
ReplyDeleteOMG!Black screen after flashing. Both files
ReplyDeleteHOW TO FIX IT PLZ
flash it with 1550 firmware your problem will be solved
ReplyDeletethanks
Deletethanks its done
ReplyDeletemy itel 1502 black screen after flash pls help me
ReplyDeletepls are you sure if flash it with 1550 file my 1505 black screen problem will be solved ?
ReplyDeleteyes man you are a genus i flash my itel 1505 before with the original file it display dead screen later i used the file you recommended 1550 is okkkkkkkkkkkkkkk thank '
ReplyDeletethats awesome it works thanks bro
DeleteGibson, Please after flashing it are you able to charge. are you not facing any challenge... sound , camera, charge, battery, wifi, network or anything at all.
DeleteI flash it and am unable to charge
i flash with itel1550 and became worse, not changing more two percet,camera upside down
ReplyDeletethe same is happening to me o. hmmmmmm
Deletehi people are sure flashing itel 1505 with itel 1550 will work? i want to be sure here
ReplyDeleteFlashed with 1550 and lost sound, ve restored to factory yet no sound pls help...
ReplyDeleteI realized that the boot.img file of 1550 do not work well on 1505 cell. so you have to get the original boot.img file of Itel 1505 cell. Not the rom over here. if you try the roms here you will get a black screen. so get and itel 1505 cell get to the root and find a file name boot.img and flash to you cell via spreadtrum and enjoy...
DeletePLS CAN I FLASHED ITEL 1505 WITH THE AFOREMENTIONED FILE? AND I WOULDN'T FACE ANY DIFFICULTIES SO EVER
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteno one have the solution uptil now? my phone is not charging, the sound is lost and camera is something else, please help
ReplyDeletehey buddy,I can help but the issue of charging is not yet,what am about telling u now will only solve every other challenges except charging.....edit the pac file of both 1505 and 1550,u can do so when u try flashing this rom just load the pac file wait until it load finish do not flash yet,go to the image file of the SPD flash tool then change the system of 1550 to that of 1505 then flash with 1505 already loaded tool...probs solved
Deleteit works,thanks man BRAVO
ReplyDelete