Note
Follow the instructions on how to
flash the device carefully below
I will not take responsibility on
whatever may happen to your device.
Flash at your own risk!
Make sure you are downloading the
exact ROM of the device you want to flash because
flashing a wrong firmware, can
render the device useless
(can't power on, can't charge and
will not be detected by a computer)
How to flash SPD devices with Research
Download or UpgradeDownload Tool
Download an
install SPD drivers from here
Extract and Launch
Research Download/UpgradeDownload Tool
Click on load icon
Navigate to the
folder containing the firmware
Select the pac
file in the firmware folder
Wait for it to
load in Research Download/UpgradeDownload tool
Click Play/Start
button
Now connect the
device to PC while holding volume down key
(Some new devices
requires holding volume up key)
Wait for flashing
process to complete
When you see
Passed! Then note that the flashing or upgrading process is complete
Disconnect and
boot up device
For a more detail
tutorial with video and pictures click here
You can also use tools like Miracle
Box, infinity CMII, Volcano, GPG
Dragon etc to flash or upgrade SPD devices
Android 5.1 (Lollipop)
Dimensions - 145 x 73.2 x 10.5 mm
5-inch Touchscreen, 480 x 854 195ppi
1.2GHz quad core
512 MB RAM
8GB Internal Memory
Supports up to 32GB microSD
8 MP Rear Camera, LED Flash,
2 MP Front Camera
2 MP Front Camera
Dual SIM
EDGE / GPRS
WIFI 802.11 b/g/n
bluetooth 3.0
3600mAh Battery
ITEL 1506 STOCK ROM
IT506-W501-20151015-RELEASE
IT506-W501-20151015-RELEASE
thx romkingz !!!!
ReplyDeleteVery good romkingz
ReplyDeleteare both roms compatible?
ReplyDeleteHow can I flash IT1506
ReplyDeleteIts NAD loading with upgrade tool and miracle box
pls i need solution forimei null for itel 1506 plsssssssssssss
ReplyDeleteWorking 100%, thank you so much, love you boss
ReplyDelete1. Power Off Phone , Remove Battery, Insert Battery Back
ReplyDelete2. Insert USB cable. In some cases Required Hold BootKey
3. Use Miracle Boot Key In cases Boot key not Find
4. Battery Should be Charged more then 50%
Waiting for USB Port...
Set MTK USB Port (COM23)
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: MT6580 SW:0000 Ver: CA00
Downloading Boot8 ...
>>ERR21002.00
Please help me resolve this problem