Note
Follow the instructions on how to
flash the device carefully below
I will not take responsibility on
whatever may happen to your device.
Flash at your own risk!
Make sure you are downloading the
exact ROM of the device you want to flash because
flashing a wrong firmware, can
render the device useless
(can't power on, can't charge and
will not be detected by a computer)
How to flash SPD devices with Research
Download or UpgradeDownload Tool
Download an
install SPD drivers from here
Extract and Launch
Research Download/UpgradeDownload Tool
Click on load icon
Navigate to the
folder containing the firmware
Select the pac
file in the firmware folder
Wait for it to
load in Research Download/UpgradeDownload tool
Click Play/Start
button
Now connect the
device to PC while holding volume down key
(Some new devices
requires holding volume up key)
Wait for flashing
process to complete
When you see
Passed! Then note that the flashing or upgrading process is complete
Disconnect and
boot up device
You can also use tools like Miracle
Box, infinity CMII, Volcano, GPG
Dragon etc to flash or upgrade SPD devices
Android 5.1 (Lollipop)
7-inch Touchscreen, 1024 x 600 , IPS 196 ppi
190 x 109 x 10.2 mm
190 x 109 x 10.2 mm
1.2GHz quad core
1GB RAM
16GB Internal Memory
Supports up to 32GB microSD
8 MP Rear Camera, LED Flash,
5 MP Front Camera
5 MP Front Camera
Dual SIM
EDGE / GPRS
HSDPA+
HSDPA+
WIFI 802.11 b/g/n
bluetooth 3.0
3000mAh Battery
ITEL 1702 STOCK ROM
IT1702-V605-20150930
IT1702-V605-20150930
Please Leave a comment after using this ROM
Report if you cannot download this file.
Sorry, but that link has been deleted. pls why this on adfly
ReplyDeleteI've checked and the link is still there. Try again. might be your ip address is not supported by adfly. Sorry for the inconvenience
DeleteHi you just have a question about this ROM is that it pourait spend on a itel1701 because in fact I expect the updated lollipop in a while
ReplyDeleteAmparas TKing Thanks soo much the file is dhope working good Thanks
ReplyDelete