Flash/unbrick
or upgrade your device with the firmwares below using odin
Learn how
to use odin from here
Samsung
Galaxy E500F Stock Firmware
Arabic
E500FXXU1AOA6_OJV1AOA2
[ Android 4.4.4]
E500FXXU1ANLB_OJV1ANL4
[Android 4.4.4]
E500FXXU1BOI1_OJV1BOI2
[Android 5.1.1]
Turkey
E500FXXU1AOD1_OJV1AOD1
[Android 4.4.4]
To flash or upgrade your Galaxy SM-E500F with any of this firmware,
- Download and install samsung drivers
- Download and launch odin
- Turn off your phone
- Boot phone into download mode by holding vol down + home + power button
- When you see the yellow triangle, press volume up to continue into odin mode
- Now connect the phone to PC using USB cord
- Wait for odin to detect the phone (you will see the COM Port)
- Now click AP in odin interface then select the firmware
- After the firmware is successfully loaded,
- Click Start button
- Wait for process to complete
- When you see PASS in green then the process is complete.
- Wait for the device to reboot
Its always good to do a factory reset after doing this process
For a more detail process on how to flash or upgrade Samsung devices, click here
E5OOFXXU1A0C3 ????
ReplyDelete