Tecno J8 runs on Android 5.1 lollipop themed with HiOS.
This device is a 5.5-inch ips touchscreen display with a resolution of 720 X 1280 pixels, 267ppi. A size of 153.3 x 76.8 x 7.4 mm and weighs about 182g.
This device is a 5.5-inch ips touchscreen display with a resolution of 720 X 1280 pixels, 267ppi. A size of 153.3 x 76.8 x 7.4 mm and weighs about 182g.
Powered by 1.3GHz quadcore MediaTek MT6735 processor with Mali-T720MP2 and 2GB of RAM. There’s also 16GB of internal storage which can be expanded up to 128GB with microSD.
There is a 13MP primary camera with LED Flash and a 5-megapixel front selfie camera.
This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.0. Supports GSM, WCDMA & 4G LTE networks. Sensors on this phone include fingerprint scanner, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope.
This device is powered with a 3000Mah non-removable battery
How to flash this device using SP Flash Tool
Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong preloader, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device
Report if you cannot download any of these files.
Like and share
Donate to support this site
what is the problem here i cant download,once i click i moved to another link
ReplyDeletecamera dont work, and OTA update dont work too
ReplyDeletedead file killing fone
ReplyDeleteÏ can't call
ReplyDeleteFront camera not working
ReplyDeletehi bro can tecn j7 be upgraded to lolliop? help please
ReplyDeleteHI bro I can't download this file
ReplyDeleteplease help me
ReplyDeleteplease upload j8 v20160405
ReplyDeletedoes the file work or not
ReplyDeleteHellow Not Send sms ! Sending...
ReplyDeletehello sir downloaded the file but sp flash tool says , load scatter file is invalid! error: 8417. i gues its corrupted
ReplyDeleteHello bro can you help me my tecno j8 doesn't accept any flashing file
ReplyDeleteafter flashing the phone wont switch on
ReplyDeleteThe file is not good
ReplyDeletethis file cannot be loaded in Flashtool. Gives an error (Image ik checksum failed.)
ReplyDelete