Pages

▼

DOWNLOAD ITEL IT1408 STOCK ROM / FIRMWARE



Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk!

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong firmware, can render the device useless 
(can't power on, can't charge and will not be detected by a computer)

How to flash SPD devices with Research Download or UpgradeDownload Tool

Download an install SPD drivers from here
Download the latest version of Research Download or UpgradeDownload from here
Extract and Launch Research Download/UpgradeDownload Tool
Click on load icon
Navigate to the folder containing the firmware
Select the pac file in the firmware folder
Wait for it to load in Research Download/UpgradeDownload tool
Click Play/Start button
Now connect the device to PC while holding volume down key
(Some new devices requires holding volume up key)
Wait for flashing process to complete
When you see Passed! Then note that the flashing or upgrading process is complete
Disconnect and boot up device

For a more detail tutorial with video and pictures click here


You can also use tools like Miracle Box, infinity CMII, Volcano, GPG Dragon etc to flash or upgrade SPD devices

ITEL 1408 QUICK SPECS 

Android 5.1 (Lollipop)

Dimensions - 126 x 65.5 x 12.1 mm
4.0-inch Touchscreen, 400 x 800 

1.2GHz quad core
SC7730 chip
512 MB RAM
8GB Internal Memory 
Supports up to 32GB microSD

5 MP Rear Camera, LED Flash,
2 MP Front Camera

Dual SIM
EDGE / GPRS 
WIFI 802.11 b/g/n
bluetooth 4.0

3000mAh Battery

ITEL 1408 STOCK ROM
IT1408-W404-20161212
DOWNLOAD ROM

IT1408-W404-20160902
DOWNLOAD ROM

IT1408-W404-20160317
DOWNLOAD ROM

 *******************************************
IT1408-W404-EG-20160826
DOWNLOAD ROM

*******************************************

IT1408-W404A4-5.1-ET-20161129 
DOWNLOAD ROM

 IT1408-W404A4-5.1-ET-20161103
DOWNLOAD ROM

 ***********************************************************************
IT1408-W405-20160525
DOWNLOAD ROM

Read some tips to prevent bad display after flash here

Learn how to easily download files from Mega

PC or Mobile

Please Leave a comment after using this ROM
Like and Share
Report if you cannot download this file.

29 comments:

  1. B NBNBM2 July 2016 at 15:55

    failed to flash

    ReplyDelete
    Replies
    1. salam4 July 2016 at 10:40

      I HAVE NOT TEST IT BUT CHECK CABLE

      Delete
    2. Amparas Teekaay4 July 2016 at 14:53

      Note that most new sc7731 chips requires you holding volume up as boot key so PC will detect it properly.

      Delete
  2. B NBNBM11 July 2016 at 20:00

    failed: Uart send error,' thats whats it keeps complaining. what else can i do? pls, help me out on this bro as u always do

    ReplyDelete
  3. Unknown21 July 2016 at 00:01

    i cant seem to flash itel phones (being the only spread chipset i've tried) on my p.c.
    even after downgrading to win7 from 8.1. nothing happens during the flashing process. i have spd drivers installed. pls I need assistance

    ReplyDelete
  4. Samson22 July 2016 at 12:14

    fail: uart error

    ReplyDelete
  5. Unknown23 July 2016 at 17:08

    who has successfully flashed with this pac file?

    ReplyDelete
    Replies
    1. Amparas Teekaay24 July 2016 at 02:54

      You can always use Miracle box to flash the phone with this pac file. Choose type chip is SC7730

      Delete
    2. Phone Center27 July 2016 at 17:30

      Amparas TKing ; flashing fail help me

      Delete
  6. Unknown17 September 2016 at 19:17

    please ampara i use the second variant of this pac file and it loaded perfect but the display is lost, it only display long straight colored lines,
    please i need your help to solve this problem

    ReplyDelete
    Replies
    1. Unknown19 November 2016 at 12:38

      i had the same problem. Its because our chip is sc8830 not sc7730. If you have solution pls let me know

      Delete
    2. Ezenwamma Kosi (Bozingwa)29 March 2018 at 17:30

      Abiodun or anyone facing same issue should use IT1408-W404-20160902

      Delete
  7. FANTI PHONE CLINIC3 October 2016 at 07:59

    plees give me backup file for itel it 1408

    ReplyDelete
  8. Unknown31 October 2016 at 23:47

    no display on phone after flashing only red stripes

    ReplyDelete
    Replies
    1. Unknown22 November 2016 at 18:35

      I solved the problem by downloading correct ROM from needrom.com

      Delete
    2. Unknown13 December 2016 at 10:59

      which file did u use bro

      Delete
  9. nassor6 November 2016 at 05:05

    Same problem after flash phone display white color

    ReplyDelete
  10. nassor6 November 2016 at 05:08

    Same problem after flash phone display white color

    ReplyDelete
  11. Unknown2 December 2016 at 06:28

    This comment has been removed by the author.

    ReplyDelete
  12. tutocomplet22 December 2016 at 23:33

    REED INFO SUCCES WIHT ALADIN BOOT17 7731 EMMC NEW ANDROID

    ReplyDelete
  13. Makosylvano6 January 2017 at 18:31

    for the file's itels publish on needrom.com can not work proprety.

    ReplyDelete
  14. Unknown20 May 2017 at 11:34

    pls sir i need link for this itel 1408
    [email protected]

    ReplyDelete
  15. Unknown19 November 2017 at 17:09

    very good rom

    ReplyDelete
  16. Unknown17 December 2017 at 23:42

    please how do i get cracked miracle box

    ReplyDelete
  17. Unknown17 December 2017 at 23:55

    i have been seriously enjoying the uploads of these site and i pray for more of the grace of God

    ReplyDelete
  18. Hustle $ Update ground17 September 2018 at 11:42

    Itel 1408 has different variant i used IT1408-W404-20160317 and it gave me phone colour blue line screen which is the varian 1 Then i downloaded IT1408-W404-20160902 variant 2 and it work perfectly.
    Kudos to romking but i think u should try to specify each files before uploading it.

    ReplyDelete
    Replies
    1. Amparas Teekaay17 September 2018 at 21:15

      The different variants of ROMs are separated with the star lines. You actually used the same variant but different updates. The first ROM you used (20160317) is an old build with respect to the phone you are flashing ie it contains old display drivers. Then you downloaded a new one (20160902) whose drivers match perfectly with your phone.
      On a normals what you actually need to check before downloading is the build id then download ROM that is same or updated to avoid issues.
      Hope you understand.

      Delete
  19. Nat15 October 2018 at 01:42

    Thanks . ONLY THIS ONE WORK (20160902) SO PLEASE DOWNLOAD IT .
    I,M FROM LIBERIA,MONROVIA WEST AFRICA.

    ReplyDelete
  20. Unknown3 April 2020 at 19:00

    Yes d man frm Liberia, is very correct, the file (20160902) work perfect and also fix my display red and white line problem, thanks to u all God bless.

    ReplyDelete