DOWNLOAD TECNO N8 & TECNO N8S STOCK ROM / FIRMWARE

Note

Follow the instructions on how to flash the device carefully below

I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 

 flashing a wrong preloader, will make the device completely dead 

(can't power on, can't charge and will not be detected by a computer) 

 TECNO N8 QUICK SPECS

Dimension - 139 x 70.2 x 7.9 mm

5.0 - inch Touchscreen, 720 x 1080 pixels

Weight - 194g

1.0 GHz dual-core Processor

MediaTek MT6580

Mali 400-MP2 GPU

1GB RAM

8GB Internal Memory 

up to 32GB microSD

5MP Rear Camera, LED Flash, Auto Focus

2MP Front Camera 

Dual SIM

EDGE , GPRS - 850 / 900 / 1800 / 1900MH

WCDMA 900/2100

4G LTE

WIFI 802.11 b/g/n

bluetooth 4.0

2300mAh Battery

TECNO N8 STOCK ROM (TANZANIA TIGO)

N8-H356-C1-M-HiOS-TZ-TIGO-LOCK-20160602
DOWNLOAD ROM

=====================================================

TECNO N8S STOCK ROM (KENYA SAFARICOM)

N8S-H356B1-M-KESF-160727V31
DOWNLOAD ROM

Report if you cannot download any of these files.

Donate to support this site

How to flash TECNO devices using SP Flash Tool

Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash

For a more detail guide with video and pictures on how to use SP Flash Tool, click here

How to flash TECNO devices using WiseLink Tool

Download and install the latest version of WiseLinkTool
Launch WiseLink Tool
Tick off-line log in then click Open RegCode File and select the zzzzzzzzzzzzz.key.
After selecting the file, Click OK to launch.
Click the Browse button (...) on Scatter Loading File
Navigate and select the scatter file inside stock ROM folder
Click Download button
Turn off device and connect to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash

For a more detail guide with video and pictures, on how to use WiseLinkTool, click here

You can also use other tools like SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device

If you encounter any error while flashing your device, click here and see if it solves your problem