Note
Follow the instructions on how to
flash the device carefully below
I will not take responsibility on
whatever may happen to your device.
Flash at your own risk!
Make sure you are downloading the
exact ROM of the device you want to flash because
flashing a wrong firmware, can
render the device useless
(can't power on, can't charge and
will not be detected by a computer)
How to flash SPD devices with Research
Download or UpgradeDownload Tool
Download an
install SPD drivers from here
Extract and Launch
Research Download/UpgradeDownload Tool
Click on load icon
Navigate to the
folder containing the firmware
Select the pac
file in the firmware folder
Wait for it to
load in Research Download/UpgradeDownload tool
Click Play/Start
button
Now connect the
device to PC while holding volume down key
(Some new devices
requires holding volume up key)
Wait for flashing
process to complete
When you see
Passed! Then note that the flashing or upgrading process is complete
Disconnect and
boot up device
You can also use tools like Miracle
Box, infinity CMII, Volcano, GPG
Dragon etc to flash or upgrade SPD devices
ITEL 1516 PLUS QUICK SPECS
Dimension
- 145.5 x 72.8 x 9.95 mm
5.0 -
inch Touchscreen, 480 x 854 pixels
1.0 GHz quad-core Processor
Mali
400-MP2 GPU
1GB RAM
8GB
Internal Memory
up to 32GB microSD
5MP
Rear Camera, LED Flash, Auto Focus
2MP
Front Camera
Dual SIM
EDGE ,
GPRS - 850 / 900 / 1800 / 1900MH
WCDMA
900/2100
WIFI
802.11 b/g/n
bluetooth
4.0
5000mAh Battery
ITEL 1516 PLUS STOCK ROM
IT1516PLUS-C195B-20160906
Report if you cannot download any of
these files.
Like and share
Learn
how to easily download files from Mega
Donate to support this site
after flashing the above file the phone writes No Service but it sees the sim card.... solution needed
ReplyDeleteCheck IMEI
Deletethere's IMEI on it
DeleteSame thing with me,so stop flashing the firmware on the phone, the file has no network
ReplyDeletebackup nv before flash then restore after flash
ReplyDeleteHow to backup NV
Delete