Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk!
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong firmware, can render the device useless
(can't power on, can't charge and will not be detected by a computer)
How to flash SPD devices with Research Download or UpgradeDownload Tool
Download an install SPD drivers from here
Extract and Launch Research Download/UpgradeDownload Tool
Click on load icon
Navigate to the folder containing the firmware
Select the pac file in the firmware folder
Wait for it to load in Research Download/UpgradeDownload tool
Click Play/Start button
Now connect the device to PC while holding volume down key
(Some new devices requires holding volume up key)
Wait for flashing process to complete
When you see Passed! Then note that the flashing or upgrading process is complete
Disconnect and boot up device
You can also use tools like Miracle Box, infinity CMII, Volcano, GPG Dragon etc to flash or upgrade SPD devices
ITEL IT1508 PLUS QUICK SPECS
Dimension - 143.5 x 73.7 x 9.3 mm
5 - inch Touchscreen, 480 x 854 pixels
5 - inch Touchscreen, 480 x 854 pixels
Weight - 194g
1.3 GHz quad-core Processor
SPREADTRUM
1GB RAM
8GB Internal Memory
up to 32GB microSD
5MP Rear Camera, LED Flash, Auto Focus
2MP Front Camera
Dual SIM
EDGE , GPRS - 850 / 900 / 1800 / 1900MH
WCDMA 900/2100
WIFI 802.11 b/g/n
bluetooth 2.1 + EDR
2400mAh Battery
ITEL IT1508 PLUS STOCK ROM
IT1508_PLUS-C160H-EG-20160907
Report if you cannot download any of these files.
Like and share
Learn how to easily download files from Mega
solution to itel 1508 modem Assert in file problem
ReplyDeleteDoesnt work . looop s
ReplyDelete