Dimension: 71 x 142.5 x 8.3 mm
Weight: 152g
CPU: 1.7GHz Octa Core
SoC: MediaTek MT6592
GPU: Mali 450 MP4
RAM: 2GB
Storage: 16GB internal up to 64GB microSD
Camera: 8 MP front & 13 MP back
Dual SIM
GPRS - EDGE – HSPA+
WiFi b, g, n, WiFi hotspot
Blutooth 4.0
USB 2.0
Battery: 2100mAh
Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong preloader, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)
How to flash MTK devices using SP Flash Tool
Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device
Blackview Arrow Stock Firmware
Android 4.4 KitKat
S902_H1_Blackview_V0.4_20150312
Size - 489MB
No comments:
Post a Comment