Gionee P2s Quick Review
This phone comes with a 4.0-inch
touchscreen display with a resolution of 480 x 800 pixels and dimension of
124.0 x 64.0 x 9.3 mm. It weighs about 124g.
Powered by 1.3GHz dual-core Cortex A7 MediaTek MT6572 processor and 512MB of RAM there’s also 8GB of
internal storage which can be expanded up to 32GB with microSD. Gionee P2s runs
on Android 4.2 Jelly Bean OS.
There is a 5-megapixel primary
camera and a 0.3-megapixel front selfie camera.
This is a dual SIM Phone with
other connectivity options like Wi-Fi, GPS and Bluetooth. Supports 2G,
3G networks. Sensors on this phone include Compass Magnetometer, Ambient
light sensor, Accelerometer, Proximity sensor and Gyroscope.
This device is powered by a 160Mah non-removable battery.
DOWNLOAD GIONEE P2S STOCK ROM/FIRMWARE
Gionee_P2S_0201_5552
Gionee_P2S_0201_5459
If you have a dead Gionee P2S after flashing any of the firmware above, download and flash the file below. Use WiseLinkTool for smooth process
Gionee P2S Dead Phone Fix
If you don't want to use any of the files above, you can still fix dead/bricked Gionee P2S using Walton Primo F4 Stock ROM/firmware.
How to flash this device using SP
Flash Tool
Download, MTK VCOM USB drivers from here
Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
For a more detail guide with video and pictures on how to use SP
Flash Tool, click here
You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this
device.
Report if you cannot download any of these files.
Like and share
No comments:
Post a Comment