This phone comes with a 5.50-inch touchscreen display with a resolution of 1080 pixels by 1920 pixels FHD. A size of 153 x 75.2 x 7.6 mm and weighs about 170g.
Powered by 1.8GHz octa-core MediaTek Helio P10 MT6755M processor and 4GB of RAM there’s also 64GB of internal storage which can be expanded up to 128GB with microSD.
Gionee S6 Pro runs on Android 6.0 Marshmallow.
There is a 13-megapixel primary camera and a 8-megapixel front selfie camera.
This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS, Bluetooth and USB OTG. Supports 2G, 3G and 4G networks. Sensors on this phone include Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope.
This device is powered by a 3130Mah non-removable battery
Gionee_S6_Pro_0201_T5484
How to flash gionee S6 Pro using SP Flash Tool
Note
Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong preloader, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)
Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device
Report if you cannot download any of these files.
Donate to support this site
Link Dead, Please Update it.
ReplyDelete