Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong preloader, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)
How to flash this QMX device using SP Flash Tool
Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device
If you encounter any error while flashing your device, click here and see if it solves your problem
Note that this is a clone device of Sony with different funny names and brand. Another popular device which uses the same firmware below is CMX. Normally a good way to know which file to use is by reading the build id but sometimes the build id shows generic stuffs thus the best way to identify is by checking the board id.
Also if you are not sure of the file you want to flash, make a stock backup with Miracle box, CM2 etc so that if something goes wrong you can put the phone back at it original state
DOWNLOAD QMX P9 PRO (SONY CLONE) STOCK ROM BELOW
Note that this is a clone device of Sony with different funny names and brand. Another popular device which uses the same firmware below is CMX. Normally a good way to know which file to use is by reading the build id but sometimes the build id shows generic stuffs thus the best way to identify is by checking the board id.
Also if you are not sure of the file you want to flash, make a stock backup with Miracle box, CM2 etc so that if something goes wrong you can put the phone back at it original state
DOWNLOAD QMX P9 PRO (SONY CLONE) STOCK ROM BELOW
Z6U090QD_V017En20161130
Z6U090QD_V014En20161103
DOWNLOAD ROM
Learn how to easily download files from Mega
Report if you cannot download any of these files.
Donate to support this site
No comments:
Post a Comment