Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong preloader, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)
How to flash Sony Xperia Clone using SP Flash Tool
Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device
If you encounter any error while flashing your device, click here and see if it solves your problem
Note that this is a clone device of Sony Xperia with different funny names like CMX, QMX, XBN etc. Normally a good way to know which file to use is by reading the build id but sometimes the build id shows android generic stuffs thus the best way to identify is by checking what's on the board id.
Also if you are not sure of the file you want to flash, make a stock backup with Miracle box, CM2, GSM Alladin etc so that if something goes wrong you can put the phone back at it original state.
Tip
Most times, the problem we have with Sony Xperia Clone devices is hang on logo.
The easiest solution to fix this problem is flashing just boot.img. If you are faced with this hang on logo problem, simply backup(Read) boot.img and lk.bin file using miracle box, gsm aladin, infinity cm2 etc
Then Flash back the two images backed up and the phone will be ok with no data loss.
DOWNLOAD SONY CLONE CMX Z3 STOCK ROM BELOW
Note that this is a clone device of Sony Xperia with different funny names like CMX, QMX, XBN etc. Normally a good way to know which file to use is by reading the build id but sometimes the build id shows android generic stuffs thus the best way to identify is by checking what's on the board id.
Also if you are not sure of the file you want to flash, make a stock backup with Miracle box, CM2, GSM Alladin etc so that if something goes wrong you can put the phone back at it original state.
Tip
Most times, the problem we have with Sony Xperia Clone devices is hang on logo.
The easiest solution to fix this problem is flashing just boot.img. If you are faced with this hang on logo problem, simply backup(Read) boot.img and lk.bin file using miracle box, gsm aladin, infinity cm2 etc
Then Flash back the two images backed up and the phone will be ok with no data loss.
DOWNLOAD SONY CLONE CMX Z3 STOCK ROM BELOW
Report if you cannot download any of these files.
Donate to support this site
staus scatter file invalid
ReplyDeletestatus scatter file invalid
ReplyDelete