DOWNLOAD REDMI NOTE 4 2016050 STOCK ROM/FIRMWARE

Note 4 2016050 Quick Review

launched August 2016 and runs on Android 6.0 Marshmallow with MIUI 8.0.
This phone comes with a 5.5-inch touchscreen display with a resolution of 1080 X 1920 pixels with ~401ppi. A size of 151 x 76 x 8.74mm and weighs about 175g.

Powered by 2.1GHz deca-core processor MediaTek MT6797 Helio X20 with mali T880 MP4 GPU. Card take SDcard of upto 256GB.
Exclusive Edition is bundled with 64GB internal storage and 4GB RAM

High Edition is bundled with 64GB internal storage and 3GB RAM

Standard Edition is bundled with 16GB internal storage and 2GB RAM

There is a 13-megapixel primary camera with dual LED Flash and a 5-megapixel front selfie camera.

This is a single SIM Phone with other connectivity options like Wi-Fi, GPS, Bluetooth and USB OTG. Supports 2G, 3G and 4G networks. Sensors on this phone include Finger print, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope.

This device is powered by a 4100Mah non-removable battery

DOWNLOAD REDMI NOTE 4 2016050 STOCK ROM/FIRMWARE

nikel_global_images_V8.0.4.0.MBFMIDG_20160805.0000.29_6.0_global

DOWNLOAD ROM

cust_image_mi_2016050 (extract and copy cust.img into firmware folder [replace] )
DOWLOAD

How to flash Redmi Note 4 201605 using SP Flash Tool

Note

Follow the instructions on how to flash the device carefully below

I will not take responsibility on whatever may happen to your device.

Flash at your own risk..

Make sure you are downloading the exact ROM of the device you want to flash because 

 flashing a wrong preloader, will make the device completely dead 

(can't power on, can't charge and will not be detected by a computer)

Extract the Stock ROM downloaded above using winrar or 7zip
Extract and copy cust.img into firmware folder (replace)
Download, MTK VCOM USB drivers from here

Download, latest SP Flash Tool from here

Launch Flashtool inside the extracted folder

Click on scatter loader button

Navigate and select the scatter file inside the stock ROM folder

Select either Download only, Firmware Upgrade or Format + Download from drop down menu

Click Download Button

Now turn off and connect your device to PC

Wait for flashing process to complete

Reboot device

If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash

For a more detail guide with video and pictures on how to use SP Flash Tool, click here

You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device

If you encounter any error while flashing your device, click here and see if it solves your problem

Report if you cannot download any of these files.

Like and share

facebook.com/romkingz

Donate to support this site