launched October 2016 this device runs on Android 6.0 Marshmallow upgradeable to Android 7.0 Nougat ie MIUI 8 & 8.2 respectively.
Wide 6.4-inch touchscreen display with a resolution of 1080 X 2050 pixels and ~362ppi, this device got sharp graphics. MI Mix has dimension of 158.8 x 81.9 x 7.9 mm and weighs about 209g.
Wide 6.4-inch touchscreen display with a resolution of 1080 X 2050 pixels and ~362ppi, this device got sharp graphics. MI Mix has dimension of 158.8 x 81.9 x 7.9 mm and weighs about 209g.
Powered by quad core ( 2 x 2.3GHz & 2 x 2.1GHz Kryat) Qualcomm MSM8996 Snapdragon 821 with Andreno 530 GPU. This device is bundled with 128GB internal storage with 4GB RAM or 256GB internal storage with 6GB RAM.
There is a 16-megapixel primary camera with Dual LED Flash and a 5-megapixel front selfie camera.
This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS, Bluetooth and USB OTG. Supports GSM, HSPA and LTE network tecnology. Sensors on this phone include Fingerprint, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope.
This device is powered by a 4400Mah non-removable battery
lithium_images_7.3.2_20170302.0000.00_6.0_cn
DOWNLOAD ROM
MI Mix EDL Boot.bat
DOWNLOAD
How to flash Xiaomi MI Mix using MI Flash Tool
If extension of ROM/firmware is .gz or .tar, rename to .tgz
Launch MI Flash Tool
Click Select button
MI Mix EDL Boot.bat
DOWNLOAD
How to flash Xiaomi MI Mix using MI Flash Tool
If extension of ROM/firmware is .gz or .tar, rename to .tgz
Extract the firmware above using winrar or 7zip
Download and install MI Flash tool from hereLaunch MI Flash Tool
Click Select button
Navigate and select firmware folder
Select clean all at the bottom of the flash tool (Flash_all.bat).
Put device into fastboot mode by pressing volume down + power button
Connect device to PC
Extract and open EDL Boot Folder
Launch xiomi_edl_boot.bat and wait for process to complete
Click Refresh on Xiaomi FLash tool so that tool will detect device.
When device is detected you will see COM PORT(eg COM: 7)
Click Flash and wait for process to complete
Phone will reboot after process is complete
For more details on how to flash Xiaomi Qualcomm Snapdragon devices using MI Flash tool, click here
Like and Share
facebook.com/romkingz
Put device into fastboot mode by pressing volume down + power button
Connect device to PC
Extract and open EDL Boot Folder
Launch xiomi_edl_boot.bat and wait for process to complete
Click Refresh on Xiaomi FLash tool so that tool will detect device.
When device is detected you will see COM PORT(eg COM: 7)
Click Flash and wait for process to complete
Phone will reboot after process is complete
For more details on how to flash Xiaomi Qualcomm Snapdragon devices using MI Flash tool, click here
Like and Share
facebook.com/romkingz
boss of life is there any ways we could remove password only??... thanks for urgent response
ReplyDeleteboss of life is there any ways we could remove password only??... thanks for urgent response
ReplyDelete