DOWNLOAD XIAOMI REDMI PRO STOCK ROM/FIRMWARE

Redmi Pro MTK Quick Review

Released August 2016

This phone comes with a 5.5-inch touchscreen display with a resolution of 1080 X 1920 pixels with ~401ppi. A size of 151.5 x 76.2 x 8.2 mm and weighs about 174g.

Powered by 2.5GHz deca-core processor MediaTek MT6797T Helio X25 (High and Exclusive version) & 2.3 deca-core processor MediaTek MT6797 Helio X23 (Standard version). All come with Mali T880 MP4 GPU. Exclusive version have 128GB internal storage and 4GB RAM while other variants have 32/64GB with 3GB RAM. Micro SDcard slot upto 256GB. Redmi Pro runs on Android 6.0 Marshmallow with MIUI 8.0.

13MP and 5MP Dual primary camera with Dual LED Flash and a 5-megapixel front selfie camera.

This is a single SIM Phone with other connectivity options like Wi-Fi, GPS, Bluetooth and USB OTG. Supports 2G, 3G and 4G networks. Sensors on this phone include Finger print, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope.

This device is powered by a 4050Mah non-removable battery

DOWNLOAD REDMI PRO STOCK ROM/FIRMWARE

omega_images_V8.1.2.0.MHQCNDI_20161116.0000.00_6.0_cn (stable rom)

DOWNLOAD ROM

omega_images_7.3.9_20170309.0000.00_6.0 (developers rom)

DOWNLOAD ROM

How to flash Redmi Pro using SP Flash Tool

Note

Follow the instructions on how to flash the device carefully below

I will not take responsibility on whatever may happen to your device.

Flash at your own risk..

Make sure you are downloading the exact ROM of the device you want to flash because 

 flashing a wrong preloader, will make the device completely dead 

(can't power on, can't charge and will not be detected by a computer)

Extract the Stock ROM downloaded above using winrar or 7zip 
Download, MTK VCOM USB drivers from here

Download, latest SP Flash Tool from here

Launch Flashtool inside the extracted folder

Click on scatter loader button

Navigate and select the scatter file inside the stock ROM folder

Select either Download only, Firmware Upgrade or Format + Download from drop down menu

Click Download Button

Now turn off and connect your device to PC

Wait for flashing process to complete

Reboot device

If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash

For a more detail guide with video and pictures on how to use SP Flash Tool, click here

You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device

If you encounter any error while flashing your device, click here and see if it solves your problem

Report if you cannot download any of these files.

Like and share

facebook.com/romkingz

Donate to support this site