Leagoo T1 Plus runs on Android 6.0 Marshmallow with Leagoo OS 2.0.
This tab is a 5.5-inch ips touchscreen display with a resolution of 720 X 1280 pixels with ~267ppi. A size of 149.9 x 76.3 x 8.3 mm and weighs about 171g.
Powered by 1.3GHz quad-core processor MediaTek MT6737 and 3GB of RAM there’s also 16GB of internal storage which can be expanded up to 64GB with microSD.
There is a 13-megapixel primary camera with LED Flash and a 8-megapixel front selfie camera.
This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.1. Supports 2G, 3G and 4G LTE networks. Sensors on this phone include fingerprint, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope.
This device is powered by a 2660Mah non-removable battery
How to flash leagoo t1 plus using SP Flash Tool
Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong preloader, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device
Report if you cannot download any of these files.
Like and share
Donate to support this site
Nice one.
ReplyDeleteHttp://www.trendinginfotech.com