Lenovo Vibe K5 Quick Review
This phone comes with a 5.0-inch touchscreen display with a resolution of 1080 pixels by 1920 pixels FHD ~441 ppi . A size of 142 x 71 x 8 mm and weighs about 142g.
Powered by 1.4GHz octa-core Qualcomm MSM8939v2 processor, 2GB of RAM and Andreno 450GPU there’s also 16GB of internal storage which can be expanded up to 32GB with microSD.
Lenovo S1 Pro runs on Android 5.1 Lollipop.
There is a 13-megapixel primary camera and a 5-megapixel front selfie camera.
This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS, Bluetooth and USB OTG. Supports 2G, 3G and 4G LTE networks. Sensors on this phone include Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope.
This device is powered by a 2750Mah removable battery
A6020a40_S029_160705_16G_ROW
DOWNLOAD ROM
How to flash this devices using Qualcomm Flash Image Loader (QFIL)
Download an install the latest version of QPST from here
Download an install Qaulcomm usb drivers from here
To launch QFIL, navigate to
C:\Program Files\Qualcomm\QPST\bin)
Now connect your device to PC while holding both vol up & down button
Device will be detected and you will see
Qualcomm HS-USB QDLoader 9008 (COM XX)
Click Browse button under Select Build section
Navigate and select the folder of the firmware
Click on XML button
from the pop up, select rawprogram xml file and then patch xml file
Click Browse button under Select programmer section
How to flash this devices using Qualcomm Flash Image Loader (QFIL)
Download an install the latest version of QPST from here
Download an install Qaulcomm usb drivers from here
To launch QFIL, navigate to
C:\Program Files\Qualcomm\QPST\bin)
Now connect your device to PC while holding both vol up & down button
Device will be detected and you will see
Qualcomm HS-USB QDLoader 9008 (COM XX)
Click Browse button under Select Build section
Navigate and select the folder of the firmware
Click on XML button
from the pop up, select rawprogram xml file and then patch xml file
Click Browse button under Select programmer section
From dialogue box select the prog_emmc_firehose mbn file and click OK
Click Download button and wait for flash process to complete
For a more detail tutorial on how to flash this device with QFIL, click here
Click Download button and wait for flash process to complete
For a more detail tutorial on how to flash this device with QFIL, click here
You can also use tool like QcomDLoader to flash this phone.
Donate to support this site
No comments:
Post a Comment