DOWNLOAD TECNO i3 STOCK ROM/FIRMWARE

Note

Follow the instructions on how to flash the device carefully below

I will not take responsibility on whatever may happen to your device.

Flash at your own risk..

Make sure you are downloading the exact ROM of the device you want to flash because 

 flashing a wrong preloader, will make the device completely dead 

(can't power on, can't charge and will not be detected by a computer)

How to flash MTK devices using SP Flash Tool

Download, MTK VCOM USB drivers from here

Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash

For a more detail guide with video and pictures on how to use SP Flash Tool, click here

You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device

If you encounter any error while flashing your device, click here and see if it solves your problem

 TECNO i3 QUICK SPECS

Android 7.0 with HiOS UI (Nougat)

5.0-inch Touchscreen, 720 x 1280 , IPS 294 ppi 

1.5GHz quad-core Processor

MediaTek MT6737

2GB RAM

16GB Internal Memory 

Supports up to 128GB microSD

8MP Rear Camera, LED Flash, Auto Focus

8MP Front Camera 

Dual SIM

2G: GPRS /EDGE

3G: HSDPA
4G LTE

WIFI 802.11 b/g/n

bluetooth 4.2

3050mAh Battery

TECNO i3 STOCK ROM

I3-H375A1-N-IN-161221V28

DOWNLOAD ROM

 Learn how to easily download files from Mega

PC or Mobile

Report if you cannot download any of these files.

Like and share
facebook.com/romkingz

Donate to support this site