DOWNLOAD M-HORSE J7 STOCK ROM/FIRMWARE

M-Horse J7 Quick Review

This phone comes with a 5-inch touchscreen display with a resolution of 480 X 854 pixels with ~196ppi. A size of 135 x 69.1 x 10.8 mm and weighs about 220g.

Powered by 1.0GHz dual-core MediaTek MT6572 Nand Processor and 512MB of RAM there’s also 4GB ROM which can be expanded up to 32GB with microSD. 

M-Horse J7 runs on Android 4.4.2 KitKat.

There is a 2-megapixel primary camera with LED Flash and a 0.3-megapixel front selfie camera.

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS, Bluetooth, Micro USB 2.0 also supports only 2G. Sensors on this phone include Compass Magnetometer, , Accelerometer, Proximity sensor and Gyroscope. 

Powered by a 1500Mah removable battery

DOWNLOAD M-HORSE J7 STOCK ROM

JHM-J7_APK-S608-20160422-V07-DubleCARD (MTK CHIP)

DOWNLOAD ROM

=============================================

F8_JHM_J7_5990_APK_NG_V01_20170606_DOUBLECARD (SPD CHIP)
Use ResearchDownload or UpgradeDownload Tool for this file
DOWNLOAD ROM

Learn how to easily download files from Mega

PC or Mobile

How to flash this device using SP Flash Tool

Note

Follow the instructions on how to flash the device carefully below

I will not take responsibility on whatever may happen to your device.

Flash at your own risk..

Make sure you are downloading the exact ROM of the device you want to flash because 

 flashing a wrong preloader, will make the device completely dead 

(can't power on, can't charge and will not be detected by a computer)

Download, MTK VCOM USB drivers from here
Download, latest SP Flash Tool from here

Launch Flashtool inside the extracted folder

Click on scatter loader button

Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device

If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash

For a more detail guide with video and pictures on how to use SP Flash Tool, click here

You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device

If you encounter any error while flashing your device, click here and see if it solves your problem

Report if you cannot download any of these files.

Like and share

facebook.com/romkingz

Donate to support this site