Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk!
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong firmware, can render the device useless
(can't power on, can't charge and will not be detected by a computer)
How to flash iTel A41+ using Research Download or UpgradeDownload Tool
Download an install SPD drivers from here
Download the latest version of Research Download or UpgradeDownload from here
Extract and Launch Research Download/UpgradeDownload Tool
Click on load icon
Navigate to the folder containing the firmware
Select the pac file in the firmware folder
Wait for it to load in Research Download/UpgradeDownload tool
Click Play/Start button
Now connect the device to PC while holding volume down key
(Some new devices requires holding volume up key)
Wait for flashing process to complete
When you see Passed! Then note that the flashing or upgrading process is complete
Disconnect and boot up device
For a more detail tutorial with video and pictures click here
You can also use tools like Miracle Box, infinity CMII, Volcano, GPG Dragon etc to flash or upgrade SPD devices
Itel A41+ runs on a 1.3 GHz quad-core with ARM Mali 400 MP2 Spreadtrum SC7731C SoC. 2GB RAM and 16GB internal Storage. Preloaded with Android 6.0 Marshmallow. Standard connectivity present are Wifi, bluetooth and gps available. Dual SIM standby (EDGE / GPRS, HSDPA+). 2400mAh Battery.
ITEL A41+ STOCK ROM
Like and Share
Please Leave a comment after using this ROM
Report if you cannot download this file.
No comments:
Post a Comment