DOWNLOAD iNEW L4 & iNEW L4A STOCK ROM / FIRMWARE

iNew L4 Quick Review

iNew L4 runs on Android 5.1 Lollipop.

This device is a 5.5-inch ips touchscreen display with a resolution of 1280 X 720 pixels. A size of 148 x 75 x 9.5 mm and weighs about 178g.

Powered by 1.3GHz quad-core processor MediaTek MT6753M with Mali-T720 and 2GB of RAM. There’s also 16GB of internal storage which can be expanded up to GB with microSD. 

There is a 13MP primary camera with LED Flash and a 5-megapixel front selfie camera.

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.0. Supports GSM+WCDMA+LTE FDD network mode. Sensors on this phone include fingerprint, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope.

This device is powered with a 5000Mah non-removable battery

iNew L4 1GB RAM VERSION STOCK ROMiNew_L4_V1.0.6_150724
DOWNLOAD ROM

iNew L4 2GB RAM VERSION STOCK ROM
iNew_L4_2_V1.0.3_150814

DOWNLOAD ROM

========================================


DOWNLOAD iNEW L4A STOCK ROM
iNew_L4A_2_V1.0.1_151027

DOWNLOAD ROM

How to flash this device using SP Flash Tool

Note

Follow the instructions on how to flash the device carefully below

I will not take responsibility on whatever may happen to your device.

Flash at your own risk..

Make sure you are downloading the exact ROM of the device you want to flash because 

 flashing a wrong preloader, will make the device completely dead 

(can't power on, can't charge and will not be detected by a computer)

Download, MTK VCOM USB drivers from here
Download, latest SP Flash Tool from here

Launch Flashtool inside the extracted folder

Click on scatter loader button

Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device

If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash

For a more detail guide with video and pictures on how to use SP Flash Tool, click here

You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device

If you encounter any error while flashing your device, click here and see if it solves your problem

Report if you cannot download any of these files.

Like and share

facebook.com/romkingz

Donate to support this site