Kingzone Z1 Plus runs on Android 5.1 Lollipop.
This device is a 5-inch ips touchscreen display with a resolution of 1280 X 720 pixels. A size of 153.5 x 76 x 7.5 mm and weighs about 169g.
This device is a 5-inch ips touchscreen display with a resolution of 1280 X 720 pixels. A size of 153.5 x 76 x 7.5 mm and weighs about 169g.
Powered by 1.3GHz octa-core processor MediaTek MT6753 with Mali-T720 and 2GB of RAM. There’s also 16GB of internal storage which can be expanded up to 64GB with microSD.
There is a 13MP primary camera with LED Flash and a 13-megapixel front selfie camera.
This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.0. Supports GSM+WCDMA+LTE FDD network mode. Sensors on this phone include fingerprint, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope.
How to flash this device using SP Flash Tool
Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong preloader, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device
Report if you cannot download any of these files.
Like and share
Donate to support this site
Hey, not working for me. I flashed this rom to my KZ Z1 Plus and screen only shows stripes instead kingzone logo...
ReplyDeletei am getting same problem. can anyone help
ReplyDeleteDo you know the actual build number of your device??
DeleteOr send me a picture of the board id
I think it was KINGZONE_Z1_PLUS_20151209_c221v53_tz
ReplyDeletei cannot see the build number as i dont have display now
ReplyDeleteI hope it will work fine if you have older version of firmware
ReplyDeleteI will check and see i can get another firmware for you. Or it will be best if you provide me with the board id of this device so I can search function for it faster
DeletePls I'm getting a bad display after flashing, help
ReplyDelete