Note
Follow the instructions on how to flash the device carefully
below
I will not take responsibility on whatever may happen to your
device.
Flash at your own risk!
Make sure you are downloading the exact ROM of the device you
want to flash because
flashing a wrong firmware, can render the device
useless
(can't power on, can't charge and will not be detected by a
computer)
How to flash this device using Research Download or
UpgradeDownload Tool
Download an install SPD drivers from here
Download the latest version of Research Download or
UpgradeDownload from here
Extract and Launch Research Download/UpgradeDownload Tool
Click on load icon
Navigate to the folder containing the firmware
Select the pac file in the firmware folder
Wait for it to load in Research Download/UpgradeDownload tool
Click Play/Start button
Now connect the device to PC while holding volume down key
(Some new devices requires holding volume up key)
Wait for flashing process to complete
When you see Passed! Then note that the flashing or upgrading
process is complete
Disconnect and boot up device
For a more detail tutorial with video and pictures click here
You can also use tools like Miracle Box, infinity CMII, Volcano, GPG Dragon etc to flash or upgrade SPD devices
LYF FLAME 3 LS-4001 QUICK REVIEW
Lyf Flame 3 runs on a 1.5 GHz quad-core Spreadtrum SoC. 512MB RAM and 4GB internal Storage can be expanded with
32GB TF Card. Preloaded with Android 5.1 Lollipop. Standard connectivity
present are Wifi, bluetooth and gps available. Dual SIM standby (EDGE /
GPRS, HSDPA+). 1700mAh Battery.
LYF FLAME 3 LS-4001 STOCK ROM
Lyf_Flame_3_LS_4001_V10.0
Like and Share
Please Leave a comment after using this ROM
Report if you cannot download this file.
No comments:
Post a Comment