LYF FLAME 8 LS-4505 QUICK SPECS
Dimension - 151.1 x 74.2 x 7.5 mm
4.5 - inch Touchscreen, 480 x 854 pixels, 218ppi
Weight - 153g
1.1 GHz quad-core Processor
Qualcomm Snapdragon 210
Mali 400-MP2 GPU
1GB RAM
8GB Internal Memory
Expanded with 128GB Micro SDcard
8MP Rear Camera, LED Flash, Auto Focus
5MP Front Camera
Dual SIM
EDGE , GPRS - 850 / 900 / 1800 / 1900MH
WCDMA 900/2100
4G LTE
WIFI 802.11 b/g/n
bluetooth 4.0
2000mAh Battery
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong file, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)
How to flash this devices using Qualcomm Flash Image Loader (QFIL)
Download an install the latest version of QPST from here
Download an install Qualcomm usb drivers from here
To launch QFIL, navigate to
C:\Program Files\Qualcomm\QPST\bin)
Now connect your lyf device to PC while holding both vol up & down button
Device will be detected and you will see
Qualcomm HS-USB QDLoader 9008 (COM XX)
Click Browse button under Select Build section
Navigate and select the folder of the firmware
Click on XML button
from the pop up, select rawprogram xml file and then patch xml file
Click Browse button under Select programmer section
From dialogue box select the prog_emmc_firehose mbn file and click OK
Click Download button and wait for flash process to complete
For a more detail tutorial on how to flash this device with QFIL, click here
You can also use tool like QcomDLoader to flash this phone.
LYF FLAME 8 LS-4505 STOCK ROM
LS_4505_S22A_LYF (password: RockyRaj_TamilNadu_GsmDevelopers_Team)
Please leave a comment after using this ROM
Report if you cannot download this file.
ANDROID VERSION??
ReplyDelete