Note
Follow the instructions on how to flash the device carefully
below
I will not take responsibility on whatever may happen to your
device.
Flash at your own risk!
Make sure you are downloading the exact ROM of the device you
want to flash because
flashing a wrong firmware, can render the device
useless
(can't power on, can't charge and will not be detected by a
computer)
How to flash this devices using Qualcomm Flash Image Loader (QFIL)
Download and install the latest version of QPST from here
Download and install Qualcomm usb drivers from here
To launch QFIL, navigate to
C:\Program Files\Qualcomm\QPST\bin)
Now connect your lyf device to PC while holding both vol up &
down button
Device will be detected and you will see
Qualcomm HS-USB QDLoader 9008 (COM XX)
Click Browse button under Select Build section
Navigate and select the folder of the firmware
Click on XML button
from the pop up, select rawprogram xml file and
then patch xml file
Click Browse button under Select programmer section
From dialogue box select the prog_emmc_firehose mbn file
and click OK
Click Download button and wait for flash process
to complete
You can also use tool like QcomDLoader to flash this phone.
LYF WATER 8 LS-5015 QUICK REVIEW
Lyf Water 8 runs on a 1.5 GHz quad-core Qualcomm Snapdragon 615 SoC. 3GB RAM and 16GB internal Storage can be expanded with 128GB TF Card. 13MP rear
camera and 5MP front selfie camera. Preloaded with Android 5.1 Lollipop.
Standard connectivity present are Wi-Fi, Bluetooth and GPS available. Dual SIM
standby (2G/3G/4G network). 2600mAh Battery.
LYF WATER 8 LS-5015 STOCK ROM
DOWNLOAD
ROM (password: RockyRaj_TamilNadu_GsmDevelopers_Team)
Like and Share
Please Leave a comment after using this ROM
Report if you cannot download this file.
i flash my lyf 5015 according to your process but after flashing it shows only android on screen and nothing happens what to do next please help
ReplyDelete