How to flash this devices using SP Flash Tool
Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong preloader, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)
Download, MTK VCOM USB drivers from here
Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
For a more detail guide with video and pictures on how to use SP Flash Tool, click here
You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device
If you encounter any error while flashing your device, click here and see if it solves your problem
Report if you cannot download any of these files.
LYF WIND 2 LS-5017 QUICK REVIEW
Lyf water 11 runs on a 1.3 GHz quad-core MediaTek MT6735M. 2GB RAM and 16GB internal Storage can be expanded with 32GB TF Card. 8MP rear camera and 2MP front selfie camera. Preloaded with Android 6.0 Marshmallow. Standard connectivity present are Wi-Fi, Bluetooth and GPS available. Dual SIM standby (2G/3G/4G network). 2850mAh Battery.
LYF WIND 2 LS-5017 STOCK ROM
Like and Share
Please Leave a comment after using this ROM
Report if you cannot download this file.
No comments:
Post a Comment