Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk!
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong firmware, can render the device useless
(can't power on, can't charge and will not be detected by a computer)
How to flash this devices using Qualcomm Flash Image Loader (QFIL)
Download an install the latest version of QPST from here
Download an install Qualcomm usb drivers from here
To launch QFIL, navigate to
C:\Program Files\Qualcomm\QPST\bin)
Now connect your lyf device to PC while holding both vol up & down button
Device will be detected and you will see
Qualcomm HS-USB QDLoader 9008 (COM XX)
Click Browse button under Select Build section
Navigate and select the folder of the firmware
Click on XML button
from the pop up, select rawprogram xml file and then patch xml file
Click Browse button under Select programmer section
From dialogue box select the prog_emmc_firehose mbn file and click OK
Click Download button and wait for flash process to complete
You can also use tool like QcomDLoader to flash this phone.
LYF WIND 3 LS-5502 QUICK REVIEW
Lyf Wind 3 runs on a 1.2 GHz quad-core Qualcomm Snapdragon 410 SoC. 2GB RAM and 16GB internal Storage can be expanded with 34GB TF Card. 8MP rear camera and 2MP front selfie camera. Preloaded with Android 5.1 Lollipop. Standard connectivity present are Wifi, Bluetooth and gps available. Dual SIM standby (2G/3G/4G network). 2920mAh Battery.
LYF WIND 3 LS-5502 STOCK ROM
Lyf_Wind_3_LS-5502_577012_0003_V010088
Like and Share
Please Leave a comment after using this ROM
Report if you cannot download this file.
nice one
ReplyDelete