DOWNLOAD LYF WIND 4 LS-5014 STOCK ROM / FIRMWARE

Note

Follow the instructions on how to flash the device carefully below

I will not take responsibility on whatever may happen to your device.

Flash at your own risk!

Make sure you are downloading the exact ROM of the device you want to flash because 

 flashing a wrong firmware, can render the device useless 

(can't power on, can't charge and will not be detected by a computer)

How to flash this devices using Qualcomm Flash Image Loader (QFIL)

Download an install the latest version of QPST from here

Download an install Qualcomm usb drivers from here

To launch QFIL, navigate to 

C:\Program Files\Qualcomm\QPST\bin)

Now connect your lyf device to PC while holding both vol up & down button

Device will be detected and you will see 

Qualcomm HS-USB QDLoader 9008 (COM XX)

Click Browse button under Select Build section

Navigate and select the folder of the firmware

Click on XML button

from the pop up, select rawprogram xml  file and then patch xml file

Click Browse button under Select programmer section

From dialogue box select the prog_emmc_firehose mbn file and click OK

Click Download button and wait for flash process to complete

For a more detail tutorial on how to flash this device with QFIL, click here

You can also use tool like QcomDLoader to flash this phone.

LYF WIND 4 LS-5014 QUICK REVIEW 

Lyf Wind 4 runs on a 1.1 GHz quad-core Qualcomm Snapdragon 210 msm8909 SoC. 1GB RAM and 8GB internal Storage can be expanded with 32GB TF Card. 8MP rear camera and 2MP front selfie camera. Preloaded with Android 5.1 Lollipop. Standard connectivity present are Wifi, Bluetooth and gps available. Dual SIM standby (2G/3G/4G network). 4000mAh Battery.

LYF WIND 4 LS-5014 STOCK ROM

Lyf_Wind_4_LS_5014_01_06_M909_B500R_V1.18

DOWNLOAD ROM 

Like and Share

facebook.com/romkingz

Please Leave a comment after using this ROM

Report if you cannot download this file.