This phone comes with a 4-inch touchscreen display with a resolution of 480 X 800 pixels with ~196ppi. A size of 154 x 78.1 x 7.7 mm and weighs about 290g.
Powered by 1.0GHz -core Spreadtrum Processor SC6580 and 512MB of RAM there’s also 4GB ROM which can be expanded up to 32GB with microSD.
There is a 2-megapixel primary camera with LED Flash and a 0.3-megapixel front selfie camera.
This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS, Bluetooth, Micro USB 2.0 also supports only 2G network. Sensors on this phone include Compass Magnetometer, , Accelerometer, Proximity sensor and Gyroscope.
Powered by a 2100Mah removable battery
DOWNLOAD KIMFLY Z3 STOCK ROM
Learn how to easily download files from Mega
How to flash/upgrade this device
Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong firmware, can render the device useless
(can't power on, can't charge and will not be detected by a computer)
Download and install SPD drivers from here
Download the latest version of Research Download or UpgradeDownload from here
Extract and Launch Research Download/UpgradeDownload Tool
Click on load icon
Navigate to the folder containing the firmware
Select the .pac file in the firmware folder
Wait for it to load in Research Download/UpgradeDownload tool
Click Play/Start button
Now connect the device to PC while holding volume down key
(Some new devices require holding volume up key)
Wait for flashing process to complete
When you see Passed! Then note that the flashing or upgrading process is complete
Disconnect and boot up device
For a more detail tutorial of this process with video and pictures click here
You can also use tools like MiracleBox, infinity CMII, Volcano, GPG Dragon etc to flash or upgrade SPD devices
Like and Share
Donate to support this site
download link not working.
ReplyDeleteload page as virus!