This phone comes with a 5.0-inch Super AMOLED touchscreen display with a resolution of 540 X 960 pixels with ~234ppi. A size of 137.4 x 67.4 x 9.7 mm and weighs about 156g.
Quad-Core 1.2GHz Qualcomm Snapdragon 410 MSM8916 with Andreno 306 GPU and 1GB of RAM there’s also 16GB ROM which can be expanded up to 128GB with microSD.
There is a 8-megapixel primary camera with LED Flash and a 2-megapixel front selfie camera.
This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS, Bluetooth 4.0, Micro USB 2.0 also supports GSM, WCDMA, LTE network. Sensors on this phone include Fingerprint, Compass Magnetometer, , Accelerometer, Proximity sensor and Gyroscope.
Powered by a 2300Mah removable battery
DOWNLOAD LENOVO K30-T STOCK ROM
LENOVO_K30-T_S046_150410
How to flash/upgrade this device
Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong firmware, can render the device useless
(can't power on, can't charge and will not be detected by a computer)
Download and install qualcomm drivers from here
Download and extract the firmware of the phone you want to flash or upgrade
Download and extract QcomDloader Tool here
Launch QcomDloader from extracted folder
Click Load button and then navigate and select folder of firmware you downloaded.
Note that the folder you selected must contain files firehorse.mbn rawprogram0.xml and patch0.xml.
Press start button.
Now hold volume up and volume down then connect device to PC
Wait for process to complete
Boot up device.
You can also Use Qualcomm Flash Image Tool (QFIL) to flash or upgrade this device
Download and extract the firmware of the phone you want to flash or upgrade
Download and extract QcomDloader Tool here
Launch QcomDloader from extracted folder
Click Load button and then navigate and select folder of firmware you downloaded.
Note that the folder you selected must contain files firehorse.mbn rawprogram0.xml and patch0.xml.
Press start button.
Now hold volume up and volume down then connect device to PC
Wait for process to complete
Boot up device.
You can also Use Qualcomm Flash Image Tool (QFIL) to flash or upgrade this device
Like and Share
Donate to support this site
No comments:
Post a Comment