DOWNLOAD VIVO X3F STOCK ROM / FIRMWARE

Vivo X3F Quick Review

This phone comes with a 5.0-inch touchscreen display with a resolution of 720 X 1280 pixels with ~267ppi. A size of 143.2 x 71.0 x 6.7 mm and weighs about 424g.

Quad-Core 1.2GHz Qualcomm Snapdragon 400 MSM8926 with Andreno 305 GPU and 2GB of RAM there’s also 16GB ROM which can be expanded up to 64GB with microSD. 

There is a 13-megapixel primary camera with LED Flash and a 5-megapixel front selfie camera.

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS, Bluetooth 4.0, Micro USB 2.0 also supports GSM, WCDMA, LTE network. Sensors on this phone include Fingerprint, Compass Magnetometer, , Accelerometer, Proximity sensor and Gyroscope. 

Powered by a 2360Mah removable battery

DOWNLOAD VIVO X3F STOCK ROM

VIVO_X3F_PD1227F_A_1.23.0

DOWNLOAD ROM

How to flash/upgrade this device 

Note

Follow the instructions on how to flash the device carefully below

I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 

flashing a wrong firmware, can render the device useless

(can't power on, can't charge and will not be detected by a computer)

Download and install vivo drivers from here 
Download and extract the firmware of the phone you want to flash or upgrade
Download and extract Fastboot 6.0 gui package here

Launch Fastboot.exe and wait for its gui window to appear
Now drag flash_all.bat script found inside firmware folder into Fastboot 6.0 window
Click Start button then put device into fastboot mode by pressing volume down + Power button for about 5 seconds and connect device to PC with USB cord
Wait for process to complete
Reboot phone.

Like and Share

facebook.com/romkingz

Donate to support this site