Tecno Phantom 6 Plus runs on Android 6.0 Marshmallow.
This device is a 5.95-inch ips touchscreen display with a resolution of 1080 X 1920 pixels, 370ppi. A size of 160.35 x 83.46 x 7.70 mm and weighs about 155g.
This device is a 5.95-inch ips touchscreen display with a resolution of 1080 X 1920 pixels, 370ppi. A size of 160.35 x 83.46 x 7.70 mm and weighs about 155g.
Powered by 2.5GHz dual-core processor Cortex A73, 2.0GHz Quad core Cortex A53 and 1.4GHz Quad core cortex A53 MediaTek MT6797 Helio X20 with Mali-T800MP2 and 4GB of RAM. There’s also 64GB of internal storage which can be expanded up to 128GB with microSD.
There is a 21MP primary camera with LED Flash and a 8-megapixel front selfie camera.
This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.0. Supports GSM + WCDMA+ LTE networks. Sensors on this phone include fingerprint, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope.
This device is powered with a 4050Mah non-removable battery
DOWNLOAD TECNO A9 PHANTOM 6 PLUS STOCK ROM
A9-H971A1-M-170227V114
DOWNLOAD ROM
A9-H971A1-M-170103V108
DOWNLOAD ROM
How to flash this device using SP Flash Tool
Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong preloader, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device
Report if you cannot download any of these files.
Like and share
Donate to support this site
This comment has been removed by the author.
ReplyDeleteIn the process of rooting the device i was stuck at big trouble where by the device is stuck at tecno logo currently not booting now.
ReplyDeleteThe problem is i dont make a rom backup before trying to root the device and i dont found any firmware matching my build id.. ?
The build id is A9-H971A-N1-170802V76
pls help me with the firmware solution...
Nb i flashed philx uploaded by hovatek and the phone is at state of bootloop..
1.Update the phone is booting to philz recovery
2.I wipe data factory reset still not booting
3.stuck at Tecno powered by Android not booting to System
4. All i have is build number A9-H971A-N1-170802V76
Pls assist me.
Did you get the firmware
DeleteMT6797__TECNO__Phantom6-Plus__Phantom6-Plus__7.1.1__A9-H971A-N1-170802V76 .i have
DeleteHi Alberto.
DeleteMy phone is bricked. Can you please help me with that firmware of the same build number to restore it?
Thanks
Saleh, I have the same problem with the same phone...pls have you found the firmware?
ReplyDeleteJe n'ai pas trouvé pour le tecno phantoms 6 plus H971A1-M-170225V124)
ReplyDeleteSVP mon mail est le [email protected]
MT6797__TECNO__Phantom6-Plus__7.1.1__A9-H971A-N1-180702V109__NMF26O__rlk6797_5m_n
ReplyDeleteplease kindly drop this firmware and we really appreciate romkingz
A9-H971A1-M-180910V134 i can not find this build Number
ReplyDelete