Tecno W3X runs on Android 7.0 Nougat.
This device is a 5.0-inch ips touchscreen display with a resolution of 480 X 854 pixels, 196ppi. A size of 144.1 x 73 x 9.4 mm and weighs about 182g.
This device is a 5.0-inch ips touchscreen display with a resolution of 480 X 854 pixels, 196ppi. A size of 144.1 x 73 x 9.4 mm and weighs about 182g.
Powered by 1.3GHz quad core MediaTek MT6580 processor with Mali-T720MP2 and 1GB of RAM. There’s also 8GB of internal storage which can be expanded up to 32GB with microSD.
There is 5MP primary camera with LED Flash and a 2-megapixel front selfie camera.
This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.0. Supports GSM and WCDMA networks. Sensors on this phone include Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope.
This device is powered with a 2500Mah non-removable battery
How to flash this device using SP Flash Tool
Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong preloader, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device
Report if you cannot download any of these files.
Like and share
Donate to support this site
Need tecno wx3 H8014AC-N-170830V204 pls
ReplyDeleteIs this one A new variant? for me am looking for TECNO Wx3 (8+1) A@
DeleteBoss, good evelyn ....
ReplyDeletePlease i need the stockrom backup of this tecno (wx3 8+1 A2)as i flashed it with the normal wx3 file to remove frp and then after format then boom,the file isnt compatible with the phone and now the phone is dead but system still detects it as the normal wx3 file isnt compatible with the phone ..
Am a mobile phone engineer & the customer is on my neck ...please help me out with the stockrom scatter file bro...
My email [email protected]
Jah bless you bro
I will really appreciate..
TECNO WX3 (8+1) A2 didi you gor the FLASH FILE.
DeleteGuys i face the same problem, my phone is tecno wx3 {8+1} A2, the stockrom for wx3, does not work. i need help please...
DeleteDownload wx3 file from gsmtanzania.com should work for you
ReplyDeleteplz i need help i have tecno wx3 8+1 A2 that don't boot and i downloaded wx3 file to flash it but didn't work. plz i need the file for wx3 8+1 a2 to flash my phone plz
ReplyDeleteemail me @ebenezerchibuike9@gmail
god bless you
My tecno wx3 the bluetooth and the wifi is not working. Please what is the solution to it
ReplyDeleteบริการเกมสล็อตออนไลน์ปี 2022 เกมให้เลือกเล่นมากกว่า 1,000 เกม superslot เครดิตฟรี เมก้า เล่นได้จริง แจกจริง สมัครเลยตอนนี้
ReplyDelete