Pages

DOWNLOAD TECNO W3X STOCK ROM / FIRMWARE

Tecno W3X quick specs & features
Tecno  W3X runs on Android 7.0 Nougat.

This device is a 5.0-inch ips touchscreen display with a resolution of 480 X 854 pixels, 196ppi. A size of 144.1 x 73 x 9.4 mm and weighs about 182g.

Powered by 1.3GHz quad core MediaTek MT6580 processor  with Mali-T720MP2 and 1GB of RAM. There’s also 8GB of internal storage which can be expanded up to 32GB with microSD. 

There is 5MP primary camera with LED Flash and a 2-megapixel front selfie camera.

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.0. Supports GSM and WCDMA networks. Sensors on this phone include Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope.

This device is powered with a 2500Mah non-removable battery




DOWNLOAD TECNO W3X STOCK ROM

WX3-H8014AC-N-170511V92
DOWNLOAD ROM


How to flash this device using SP Flash Tool
Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloader, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

Download, MTK VCOM USB drivers from here
Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device

If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
For a more detail guide with video and pictures on how to use SP Flash Tool, click here

You can also use other tools like WiseLinkSP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device

If you encounter any error while flashing your device, click here and see if it solves your problem
Report if you cannot download any of these files.

Like and share

Donate to support this site

9 comments:

  1. Need tecno wx3 H8014AC-N-170830V204 pls

    ReplyDelete
    Replies
    1. Is this one A new variant? for me am looking for TECNO Wx3 (8+1) A@

      Delete
  2. Boss, good evelyn ....
    Please i need the stockrom backup of this tecno (wx3 8+1 A2)as i flashed it with the normal wx3 file to remove frp and then after format then boom,the file isnt compatible with the phone and now the phone is dead but system still detects it as the normal wx3 file isnt compatible with the phone ..
    Am a mobile phone engineer & the customer is on my neck ...please help me out with the stockrom scatter file bro...


    My email [email protected]

    Jah bless you bro
    I will really appreciate..

    ReplyDelete
    Replies
    1. TECNO WX3 (8+1) A2 didi you gor the FLASH FILE.

      Delete
    2. Guys i face the same problem, my phone is tecno wx3 {8+1} A2, the stockrom for wx3, does not work. i need help please...

      Delete
  3. Download wx3 file from gsmtanzania.com should work for you

    ReplyDelete
  4. plz i need help i have tecno wx3 8+1 A2 that don't boot and i downloaded wx3 file to flash it but didn't work. plz i need the file for wx3 8+1 a2 to flash my phone plz
    email me @ebenezerchibuike9@gmail
    god bless you

    ReplyDelete
  5. My tecno wx3 the bluetooth and the wifi is not working. Please what is the solution to it

    ReplyDelete
  6. บริการเกมสล็อตออนไลน์ปี 2022 เกมให้เลือกเล่นมากกว่า 1,000 เกม superslot เครดิตฟรี เมก้า เล่นได้จริง แจกจริง สมัครเลยตอนนี้

    ReplyDelete