DOWNLOAD TECNO N9S STOCK ROM / FIRMWARE

Tecno N9S quick specs & features

Tecno  N9S runs on Android 6.0 Marshmallow

This device is a 5-inch ips touchscreen display with a resolution of 720 X 1280 pixels, 267ppi. A size of 140.7 x 72.5 x 9.5 mm and weighs about 182g.

Powered by 1.3GHz quadcore MediaTek MT6580 processor  with Mali-T720MP2 and 1GB of RAM. There’s also 16GB of internal storage which can be expanded up to 64GB with microSD. 

There is a 8MP primary camera with LED Flash and a 2-megapixel front selfie camera.

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.0. Supports GSM, WCDMA & 4G LTE networks. Sensors on this phone include scanner, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope.

This device is powered with a 2500Mah non-removable battery

DOWNLOAD TECNO N9S STOCK ROM

FOR KENYA SAFARI NETWORK

N9S-WQ500TB1-M-KESF-161215V5

DOWNLOAD ROM

------------------------------------------------------------

FOR ORANGE NETWORK

N9S-WQ500T-D1-M-Orange-V007-SKU4-20161025

DOWNLOAD ROM

N9S-WQ500T-D1-M-Orange-V004-SKU4-20160914

DOWNLOAD ROM

N9S-WQ500T-D1-M-Orange-V004-SKU4-20160906

DOWNLOAD ROM

How to flash this device using SP Flash Tool

Note

Follow the instructions on how to flash the device carefully below

I will not take responsibility on whatever may happen to your device.

Flash at your own risk..

Make sure you are downloading the exact ROM of the device you want to flash because 

 flashing a wrong preloader, will make the device completely dead 

(can't power on, can't charge and will not be detected by a computer)

Download, MTK VCOM USB drivers from here
Download, latest SP Flash Tool from here

Launch Flashtool inside the extracted folder

Click on scatter loader button

Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device

If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash

For a more detail guide with video and pictures on how to use SP Flash Tool, click here

You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device

If you encounter any error while flashing your device, click here and see if it solves your problem

Report if you cannot download any of these files.

Like and share

facebook.com/romkingz

Donate to support this site