DOWNLOAD ITEL S11 STOCK ROM / OFFICIAL FIRMWARE

iTel S11 Quick Review
iTel S11 runs on Android 6.0.1 Marshmallow.

This device is a 5-inch ips touchscreen display with a resolution of 480 X 854 pixels 181ppi. A size of 145 x 73.4 x 8.7 mm and weighs about 210g.

Powered by 1.3GHz quad-core processor MediaTek MT6580 with Mali-450MP2 GPU and 1GB of RAM. There’s also 8GB of internal storage which can be expanded up to 32GB with microSD. 

There is a 5MP primary camera with LED Flash and a 5-megapixel front selfie camera.

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.0. Supports 2G and 3G networks. Sensors on this phone include fingerprint, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope.

This device is powered with a 2400Mah non-removable battery

DOWNLOAD ITEL S11 STOCK ROM

S11-I801-6.0-V043-161110
DOWNLOAD ROM


How to flash this device using SP Flash Tool
Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..

Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloader, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)

Download, MTK VCOM USB drivers from here
Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device

If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
For a more detail guide with video and pictures on how to use SP Flash Tool, click here

You can also use other tools like WiseLinkSP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device

If you encounter any error while flashing your device, click here and see if it solves your problem
Report if you cannot download any of these files.

Like and share

Donate to support this site

1 comment:

  1. Hi bro my spflash send error S_FT_DOWNLOAD_FAIL 4008.. with all firmware.
    how to fix?

    ReplyDelete

Related Posts

Related Posts Plugin for WordPress, Blogger...