DOWNLOAD SAMSUNG GALAXY J1 J100M STOCK FIRMWARE

Flash/unbrick or upgrade your device with the firmwares below using odin

Learn how to use odin from here

SAMSUNG GALAXY J1 J100M STOCK FIRMWARE

Android 4.4 KitKat
J100MUUBU0AQC1_J100MUANC0AQD1_ANC

J100MVJU0AQD1_J100MZVV0AQE1_ZVV
To flash or upgrade your Galaxy SM-J100M with any of the firmware above,

- Download and install samsung drivers from here

- Download and launch the latest version of odin from here

- Turn off your phone

- Boot phone into download mode by holding vol down + home + power button

- When you see the yellow triangle, press volume up to continue into odin mode

- Now connect the phone to PC using USB cord

- Wait for odin to detect the phone (you will see the COM Port)

- Now click AP in odin interface then select the firmware

- After the firmware is successfully loaded,

- Click Start button

- Wait for process to complete

- When you see PASS in green then the process is complete.

- Wait for the device to reboot

It’s always good to do a factory reset after doing this process

For a more detail process on how to flash or upgrade Samsung devices, click here

For other Samsung firmwares, click here